Problem
I have installed Maintenance Pack 4 on my system and now I want to install an Operating System component that is patched by Maintenance Pack 4. What is the procedure to do this?
Solution
The SCO OpenServer 600 Release Supplement RS600D component of Maintenance Pack 4 (MP4) patches the following components (assuming the component is present on your server):
SCO Online Documentation Utilities and Framework SCO OpenServer Operating System SCO OpenServer Operating System German Language Support SCO OpenServer Operating System French Language Support SCO UNIX SVR5 Kernel SCO TCP/IP SCO TCP/IP Development System SCO TCP/IP German Language Support SCO TCP/IP French Language Support SCO NFS SCO Network Interface Card Drivers SCO UNIX Development System SCO Visual Tcl SCO Administration Framework Development System SCO Legacy OSR5 X11R5/Motif Development System SCO Standard X Clients SCO NFS Development System SCO Universal Driver Interface (UDI) SCO Universal Serial Bus (USB) Support SCO SendMail SCO Mail User Agents Administration Framework Extended X Clients SCO PPP from Morning Star SCO MMDF VERITAS Online Disk Manager (ODM)
If you install, for example, the SCO OpenServer 6.0.0 Development System on a system with MP4 already installed then you will need to reapply the MP4 patch for the Development System.
The procedure below relates to the Development System but is applicable to any component of RS600D of MP4.
To install the SCO OpenServer 6.0.0 Development System to an SCO OpenServer 6.0.0 system with MP4 applied do the following:
1) Install the SCO OpenServer 6.0.0 Development System as per normal using the Software Manager.
It is recommended not to reboot your server until the following has been completed.
2) Once the installation is complete, reapply the SCO OpenServer 600 Release Supplement RS600D sub-parcel of Maintenance Pack 4 as follows:
- Follow the standard MP4 install instructions at:
https://ftp.scoexpert.com/openserver6/600/mp/osr600mp4/osr600mp4.html#rn600mp_installuntil you arrive at the"Select software to install"screen.- On this screen selectMore Options -> View -> Expandhighlight:SCO OpenServer 600 Release Supplement RS600D (ver 1.0.0Ce)and select:Install -> ContinueThe Software Manager will not install all of RS600D but will only install those patches related to software you installed in step 1) above. In the case of the OpenServer 6.0.0 Development system, the patches installed would be:
SCO TCP/IP Development System SCO UNIX Development System SCO Legacy OSR5 X11R5/Motif Development System SCO NFS Development System
When the install is complete, exit the Software Manager.
NOTE: You may be required to reboot your system depending on
the components you have chosen to patch. A reboot is
not required in the case where you have patched the
SCO OpenServer 6.0.0 Development System.