Technical article 127056

How can I install OpenServer 6.0.0 on my ASUS F8Series (F8SN) Laptop?

OpenServer 6.0.0

Written · Last revised

Problem

How can I install OpenServer 6.0.0 on my ASUS F8Series (F8SN) Laptop?

When I try to install I get a panic at the first installation screen.

The panic is similar to:

PANIC: kernel-mode address fault on user address 0x3 Kernel Page Fault from (cs:eip) = (100:F048D4FA): eax=0 ebx=F973EC00 ecx=1 edx=0 esi=F07DB788 edi=F973EC29 ebp=F973EC18 esp=FFFDA830

DEBUGGER:
eax:   0 ebx:F973EC00 ecx:   1 edx:   0 efl:   10296
esi:F07DB788 edi:F973EC29  esp: FFFDA828 ebp:F973EC18
regset:0
usbd_attach_desc_parse+19A: movzbl 0x03(%eax),%eax

HARDWARE: The hardware configuration of the ASUS F8Series (F8SN) this article was tested with is:

CPU: Intel Core 2 Duo T9300 on an Intel 965PM motherboard RAM: 3GB Hardisk: Samsung HM160HI SATA 160GB (or alternatively with a Hitachi 250GB SATA disk) Graphic card: nVIDIA GeForce 9500M GS with 512 MB VRAM Network Card: Realtek Gbit Network card RTL (8168B) BIOS: AMIBIOS Version 302 or later

Cause

The OpenServer 6.0.0 installer is incompatible with the USB subsystem on the motherboard of this laptop.

Solution

To install OpenServer 6.0.0 on your ASUS F8Series Laptop please do the following:

1) Enter the BIOS (Press F2 during system start), change to the "Advanced Menu" Tab -> "IDE Configuration" and check that the SATA Operation Mode is set to "Enhanced". (should be the default)

2) You will need to disable the USB subsystem during installation.

The ASUS F8Series BIOS has a
"Security -> I/O Subsystem Security Menu"
that allows to "LOCK" the USB components. Setting "LOCK" will
disable all USB devices. (The BIOS Default is UNLOCKED)

3) Boot your Laptop, insert the OpenServer 6.0.0 CD1 and follow the standard installation procedure.

4) When you are prompted to configure the Network Card choose "Defer" as the Realtek network card is not supported by the OpenServer 6.0.0 Installation CD. We will configure the Realtek card once installation is complete.

When you are prompted for the video configuration, choose SCO Login disabled / Autoconfigure.

After the latest Maintenance Pack later on has been installed, we will enable scologin.

5) When the installation is complete, reboot the laptop and install OpenServer 6.0.0 Maintenance Pack 3 or later. Maintenance Pack 3 is part of the latest OpenServer 6.0.0 Media Kits and is also available to download from:

http://www.sco.com/support/update/download/release.php?rid=295

6) Once installation of MP3 is complete, you can boot your Laptop, enter the BIOS and UNLOCK the USB subsystem in the same menu that you have used before to LOCK USB.

Once you have done this you should now have access to devices such as an external USB Floppy, USB memory stick etc that are connected via USB ports to your Laptop.

7) Download the network card driver for the RealTek RTL8110SC(L) Network Card from:

http://www.realtek.com.tw/downloads/

At the time of writing, the latest version of this driver was v1.05 from 2008/6/19.

8) Follow the instructions provided by Realtek to install the driver. (The driver package is in pkgadd(ADM) format).

9) Once installed run the SCOadmin Network Configuration Manager (netconfig) to configure the card.

NOTE:     Prior to the installation of MP3 your graphical display may not
          work. Use the "scologin disable" command to stop the GUI from
          starting until you have installed MP3 if you have not disabled
	  scologin autostart during installation.
NOTE:     As soon as you have installed MP3 you must configure the USB mouse
          using the mouseadmin(ADM) command.
NOTE:     There is no native graphic driver for the nVIDIA graphic card, you
          can use the VESA driver to drive the card.

The card should have been auto configured with the VESA driver, otherwise use the "scoadmin video" command to configure the card. (e.g. in order to configure 64K color with 1280x1024 resolution)

On OpenServer 6 it is recommended to save the existing file /etc/xorg.conf (e.g. cp /etc/xorg.conf /etc/xorg.conf.bak) before running "scoadmin video".

NOTE:     In order to configure your DNS client after you have used "netcfg"
          to configure the Realtek card, run the "scoadmin client" command.

Under some circumstances the execution of "scoadmin client" might fail with an error message similar to this:

dNSystem has not been bound to the framework. (fz534975)

If you run into this problem, please run the following command and then start "scoadmin client" again.

		# touch /etc/named.d/db.cache

See also

TA127053: "My system panics at first install screen during an attempted install of SCO OpenServer 6.0.0, 5.0.7 or UnixWare 7.1.4"

From the Xinuos technical article database, record 127056. Reproduced with permission. The original is at www.sco.com/ta/127056, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.