Technical article 126185

How do I add and configure a new Host Bus Adapter to my already installed OpenServer 6.0.0 system?

OpenServer 6.0.0

Written · Last revised

Problem

I have added a new Host Bus Adapter (HBA) to my system but when I boot my server, the card is not recognized by OpenServer 6.0.0. How do I configure the card so that it is recognized by OpenServer 6.0.0?

Solution

OpenServer 6.0.0 autodetects Host Bus Adapters and only installs drivers for those Host Bus Adapters that are present and correctly configured at install time.

If you add a Host Bus Adapter (HBA) to your system post installation, then you must also add the driver for that Host Bus Adapter to the server and configure it before you can use the adapter with OpenServer 6.0.0.

For a list of Host Bus Adapters on the SCO OpenServer 6.0.0 Base CD please see:

http://osr600doc.xinuos.com/en/GetStart/gsgC.HWconfig.html#gsgC.HWconfig.HBAsupp

Let's assume you want to install an LSI Logic/Symbios 53c8xx HBA onto your server. The steps to do this are outlined below:

1) Please ensure that you have Maintenance Pack 1 and OSS702b installed on your system. You can download this maintenance pack from:

http://www.sco.com/support/update/download/product.php?pfid=12&prid=20
NOTE:     Maintenance Pack 2, when released, will supersede MP1 and OSS702b.

2) Put the SCO OpenServer 6.0.0 CD1 in your primary CD driver and mount the CD using the command:

mount /dev/cd0 /mnt

3) Add the HBA driver that you want to install using the command:

pkgadd -d /mnt

4) Power down the server, plug in the LSI Logic HBA into the server and reboot the system

5) Run the DCU(ADM) program by typing "dcu" at the shell prompt as user root as to check that the software driver has been activated against the LSI Logic hardware as follows:

- From the DCU main menu, select Software Device Drivers.

- Select Host Bus Adapters. The Software Device Drivers window for the selected class of device drivers is displayed. The window contains three fields:

Active/Inactive If an asterisk (*) appears in this field, the driver is available for use assuming the hardware it supports is installed and enabled. If the field is empty, the device driver is inactive and supports no devices.

Driver
Lists the device driver name.

Names of Supported Devices Lists the hardware controllers the device driver supports (if available). Many device drivers support multiple controllers. The Software Device Drivers window lists the controllers supported by each device driver. If a device driver is inactive, the system cannot access any of the controllers that the device driver supports.

- To view a specific device driver, move the cursor to it
and press <F6>. Information about the driver appears. In
our example the driver is called "c8xx". For a description
of the fields, see ``Viewing hardware device
configuration''.
Press <Enter> to return to the Software Device Drivers
window.

- To activate the device driver, move the cursor to the device driver's status field and press <Space>. If you want to add a new controller, the device driver that supports this controller must be active.

- To apply the changes and return to the Software Device Drivers window, press <F10>, then press <Enter>.

6) You should now be able to view the HBA configuration using commands like:

sdiconfig -l

7) If you want to configure disks that are attached to the HBA you can now run:

mkdev hd

From the Xinuos technical article database, record 126185. Reproduced with permission. The original is at www.sco.com/ta/126185, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.