Technical article 126405

How do I disable multiple core processors on OpenServer 6.0.0?

OpenServer 6.0.0

Written · Last revised

Problem

What steps are necessary to disable Intel or AMD multiple core processors on OpenServer 6.0.0?

Solution

The use of multiple processor cores is enabled by default on OpenServer 6. To disable it, enter the boot parameter:

MULTICORE=N

at the boot loader prompt (or add it to the /stand/boot or /etc/default/boot file). If the use of multiple processor cores is explicitly disabled, then the use of hyperthreading is also disabled.

Note that on some systems (particularly where multi-core
processors are included in the system's MPS tables),
ACPI=Y must be entered in addition to MULTICORE=N to
disable the use of multiple cores.
NOTES:   The boot parameters above are discussed on the boot(HW)
          manual page.

Boot parameters may also be set using the SCOadmin System Startup Manager.

Having multiple core support enabled has no effect on systems that do not have multiple core processors.

From the Xinuos technical article database, record 126405. Reproduced with permission. The original is at www.sco.com/ta/126405, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.