Problem
I have a MultiTech MT5656ZDX V.92 Serial Modem.
When I run "scoadmin modem", I can't see that modem on the list of supported MultiTech modems, when trying to add it manually.
I do not want to use a "standard" Modem from the list to run on this Modem.
How can I configure a MultiTech MT5656ZDX V.92 Serial Modem under SCO OpenServer 6.0.0, 5.0.7 & UnixWare 7.1.4?
HARDWARE: MultiTech MT5656ZDX V.92 MultiTech MT5656ZDX-V V.92 (with Voice)
Solution
Please note: This solution is also valid for the MT5656ZDX-V (Voice) Modem.
So any reference to MT5656ZDX below, can be changed to MT5656ZDXV.
Under SCO OpenServer & UnixWare, there are no hard coded Modem drivers, but modem definition files that contain the correct modem stings for the initialization on dialup or dialin.
These definition file are located in:/usr/lib/uucp/default --> OpenServer 5.0.7
/etc/uucp/default --> OpenServer 600 & UW714We only need to define the correct Modem strings.
To do that, do the following steps:
1-# cd /usr/lib/uucp/default (OSR507)
# cd /etc/uucp/default (OSR6 & UW714)2- create an empty file:# touch MultiTech_MT5656ZDX3- Change owner# chown uucp MultiTech_MT5656ZDX4- Edit the MultiTech_MT5656ZDX file and add the following text:
--- cut here ---
#
# Vendor: MultiTech_Systems
# Modem : MultiTech MT5656ZDX
#
MDM_SETUP=AT&FE0V1&D2&C1W2S0=0S95=45+MR=2
MDM_SPEAKER=ATM0
MDM_DIALCMD=ATDT
MDM_HANGUP=ATH E1
--- cut here ---5- Change to the DBase directory# cd ../DBase6- Edit the MultiTech_Systems file and add the following line at the end of the file:
MultiTech_MT5656ZDX {MultiTech MT5656ZDX} 01
{SERENUM\MTS00A0 1}7- Change directory to:/usr/lib/uucp (OSR507)
or
/etc/uucp (OSR6/UW714)and then edit the "Detect" file and add the following line under the already defined MultiTech Modem:
MultiTech_MT5656ZDX {ATI MT5656ZDX}so the file should now read:... ... MultiTech_MT2834ZDX__V-34_FAX {ATI2 MT2834ZDXI} MultiTech_MT5656ZDX {ATI MT5656ZDX} Pace_Linnet {ATI4 Pace Linnet 34 fx Modem} ... ...
8- Now run "scoadmin modem" and add manually the MultiTech MT5656ZDX.
You will see it on the list of Modems model when choosing MultiTech Systems in the Modem vendor.
9- Once configured, to see if you can access the Modem:
# cu -l /dev/tty1A dir (for OSR507/600)
# cu -l term/00m (for UW714)(or whatever serial line the modem connected to)You should get the "Connected" and you can issue "at" commands.
Type in " ~. " <RETURN> (Don't type the quotes), to get back to Unix command prompt.