Problem
I want to configure my parallel printer but CUPS doesn't recognise my parallel port.
Cause
One possible cause is that your systems BIOS isn't set to ECP or EPP mode.
Solution
1. Make sure that the parallel printer port is set to ECP or to EPP in the systems BIOS.
2. Make sure that the printer is connected and turned on while starting up.
3. Make sure that the parallel interface is recognised by OpenServer/UW7.
Run "resmgr | grep mfpd". You should get something like:3 mfpd 1 5 1 7 3bc 3bf - - - - 1 - - - 1 -
For OpenServer5, run "mkdev parallel" or check "hwconfig -hc"
4. Check that cups is running with "ps -eaf|grep cups".This should return something like:root 1501 1 0 13:56:45 ? 00:00:00 /usr/sbin/cupsdIf cupsd isn't running you can start it up by running:
# /etc/rc2.d/S99cups start5. Change your default print system from SYSV to CUPS. Edit the file:
/etc/default/lpd6. Check if CUPS recognizes your parallel port with "lpinfo -v".
It should look similar to:network socket network http network ipp network lpd direct parallel:/dev/lp0 serial serial serial serial:/dev/tty1A?baud=115200 serial serial:/dev/tty2A?baud=115200 serial serial:/dev/tty3A?baud=115200 serial serial:/dev/tty4A?baud=115200 serial serial:/dev/tty5A?baud=115200 serial serial:/dev/tty6A?baud=115200 serial serial:/dev/tty7A?baud=115200 serial serial:/dev/tty8A?baud=115200 serial serial:/dev/tty9A?baud=115200 serial serial:/dev/tty10A?baud=115200 serial serial:/dev/tty11A?baud=115200 network smb
If the "parallel" entry is missing then try running:
# /usr/lib/cups/backend/paralleland then restarting CUPS.7. Now open up a browser and connect to:
http://localhost:631 and set up a new printer.
Make sure you select "direct parallel:/dev/lp0" for the interface.
NOTE: If you don't wish to use CUPS then you can use "scoadmin printer" to
add the printer as a normal parallel printer.It may be necessary to use the "dumb" printer interface rather than the "standard" default to ensure all the buffer is printed and is not waiting for a final FormFeed character from the printed file or from the interface.
See also
TA126151 "How can I add and configure a parallel port card on my existing OpenServer 6.0.0 system?" TA126137 "How can I get my PCI parallel port recognized on UnixWare 7.1.4?"