Technical article 126842

How to install, configure and launch Merge 5.3.26c?

OpenServer 6.0.0OpenServer 5.0.7UnixWare 7.1.4

Written · Last revised

Problem

I would like to install Merge5.  What is the installation procedure?

In this example, we will use v5.3.26c from the UnixWare 7.1.4 Media Kit CD3.

Solution

First you will need :

1) A Windows <specific supported versions> CD 2) Windows License

You will also need "scologin enabled" on your server.

The documentation on Merge and how to install it is available at:

Product Documentation, which includes Windows 98 support
statement:
http://www.sco.com/products/merge/
Detailed Documentation:
http://uw714doc.xinuos.com/en/Navpages/DOShome.html

You will find it under the DOS and Windows section of the OnLine Doc or under:

http://<myserver>:8458

To install from UnixWare 7.1.4 CD3 do the following as root:

# pkgadd -d cdrom1 merge

Either enter the licence or select the evaluation copy if you don't have a license.

Once installed then either log into the CDE desktop or if the desktop isn't running, then run "startx".

- From CDE: select the ICON with the Open File Drawer (bottom
right) with the tools sticking out of it.  This is the
Application Manager.

- From "pwm": (startx) left click held -> Applications

Then for CDE or "pwm":

Then select Merge Tools -> Merge Setup -> System Wide Administration -> Load Windows CD -> Install -> Select Subdirectory if required .

The Windows CD needs to be inserted.

During the installation, Merge will need Windows system
files to refer to.  ie. the files to boot Windows from.

Should you Windows CD not have these files for whatever reason, then a DOS floppy will be needed to refer to (ie. the OS boot disk).

This can be done with a normal Windows 98 Boot Disk, for example, or have that floppy disk as a floppy image on your hard disk, if you don't have access to a floppy drive (/dev/rdsk/f0t).

For example, if you were installing Windows 98 then you need to get this Windows Boot Disk as an image so get a regular DOS Windows 98 boot disk and "dd" it with:

# dd if=/dev/fd0 (or usb floppy device) of=win98boot.dd bs=10k

Then refer to this win98boot.dd file when Merge asks for a floppy file image.

Windows will then be loaded and can then be accessed via Merge Tools in the selected desktop.

NOTES:    Merge 5.3 is also available for SCO OpenServer 5.0.7 on
          the Optional Service CD and would install in the same way as above.
See: http://osr507doc.xinuos.com/en/MergeAdminG/relnote.html

For the latest version of Merge, MergePro, refer to

http://www.sco.com/products/merge/
For UnixWare 7.1.4:
http://www.sco.com/support/update/download/release.php?rid=259
For OpenServer 6.0.0:
http://www.sco.com/support/update/download/release.php?rid=260

MergePro supports Windows 2000 and XP. Merge5 supports Windows ME, 98 and 95.

From the Xinuos technical article database, record 126842. Reproduced with permission. The original is at www.sco.com/ta/126842, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.