Problem
How to install OpenServer6 Definitive or UnixWare7 Definitive on the Certified NEC Express5800 Server T110i-S
HARDWARE: NEC Express5800/T110i-S ServerThis server was certified using this configuration: NEC branded Gigabyte mother board Intel Xeon E3-1270 V6 CPU 8GB DDR4-2400 MEM SATA 500GB 7.2K 2.5" drive Internal Super Multi Drv DVD
Solution
To configure this server for installation, enter the system BIOS and make these changes:
BIOS Processor - All enabled - X2APIC - enabled (This change was mandatory )
BIOS Boot
- Boot Mode [ Legacy ] (This change was mandatory)LSI MegaRAID SAS-MFI
- Driver MegasasNote: You must use the NEC supplied keyboard and mouse
NO BOOT PARAMETERS NEEDED to install either OpenServer6 Definitive 2018, or UnixWare7 Definitive 2018
NOTES: Once the system is installed, it is suggested that you
apply security updates using `patchck`https://www.xinuos.com/support/tools-and-utilities/patchck/ See also
https://www.xinuos.com/wp-content/uploads/OpenServer6D2M1-GettingStartedGuide-201712.pdf
https://www.xinuos.com/wp-content/uploads/OpenServer6D2M1-ReleaseNotes-201712.pdfhttps://www.xinuos.com/wp-content/uploads/UnixWare7D2M1-GettingStartedGuide-201712.pdf
https://www.xinuos.com/wp-content/uploads/UnixWare7D2M1-ReleaseNotes-201712.pdfhttps://www.nec.com/en/global/prod/express/tower/t110i-s/index.html
https://download.xinuos.com/openserver6D/D2M1/6D2M1_Downlosds.txt
https://download.xinuos.com/unixware7D/D2M1/7D2M1_Downloads.txt