Problem
I have the following DELL PowerEdge T100 server with the following hardware spec:
- Dell Poweredge T100 - Xeon Dual Core 3.0GHz E3110- 2G RAM - DELL Disk controller - 2 x SAS 146GB 15K drives - Broadcom 5722 NIC - SATA DVD-ROM drive
when trying to install SCO OpenServer 6.0.0 or UnixWare 7.1.4, the install ISL does boot from the SATA DVD-ROM, but at a later stage (like adding additional HBA driver via Cd-ROM), the ISL does not find the SATA DVD-ROM drive anymore and the ISL install fails.
Is there a way to load Openserver 6.0.0 or UnixWare 7.1.4 on DELL Poweredge T100?
Solution
As default, DELL ship the PowerEdge T100 with the SATA DVD-ROM connected to the internal SATA port C "SATA-C", while SATA-A and SATA-B ports are not used.
The SCO OpenServer 6 or Unixware 7.1.x "ide" HBA driver, regardless of the "ide" version (a-h seen), has an issue accessing the SATA DVD-ROM drive once the ISL kernel is loaded into the memory.
To fix this issue, please carry out the following actions:
- Re-connect the SATA DVD-ROM to SATA-A port instead of C. - Boot the server and enter into the BIOS and change the following parameters:
Disable SATA-C port Set SATA-A port to "AUTO" Make the SATA-A port to be the first boot sequence.
Now you should be able to install Openserver 6.0.0 or Unixware 7.1.4 on the DELL PowerEdge T100, as the loaded ISL kernel and "ide" driver will detect the SATA DVD-ROM on the SATA-A port.
For the DELL Disk controller, to check you have the latest driver, see TA 126690
NOTES: The DELL Poweredge T100 is not a certified hardware under
SCO OpenServer 6.0.0 or UnixWare 7.1.4, but been reported
to work with UnixWare 7.1.4 and OpenServer 6.0.0.