Technical article 125265

How to relicense Openserver 5.0.7 with a shipping product license after installing with a 60 day evaluation license

OpenServer 6.0.0OpenServer 5.0.7UnixWare 7.1.3UnixWare 7.1.4

Written · Last revised

Problem

This Technical Article refers specifically to OpenServer 5.0.7 but the same procedure is also advised for later versions of SCO product, including OpenServer6 and UnixWare7.

I performed a fresh installation of Openserver 5.0.7 with an SCO Openserver Enterprise System 60-day expiring evaluation I have received my full 5.0.7 license, how do I relicense it?

Solution

To update your Openserver Enterprise System 5.0.7 from an 60-day
evaluation license with a full 5.0.7 license, you will need to perform
the following  steps:

Bring the system into System Maintenance Mode run Scoadmin ----> License manager

Highlight the SCO Openserver Enterprise 60-day evaluation license

From the License menu at the top of the screen choose "License Remove" to remove the evaluation license from the License Manager.

You will see the following message:

"Are you sure you want to remove the license for SCO Openserver Enterprise?"

Choose "Yes"

Go back to the license menu and choose to "Add a Product or Service License"

Enter the license information from your SCO Openserver Enterprise System 5.0.7 Certificate of License and Authenticity.

Exit the Scoadmin License Manager and reboot the system

Running the uname -X command should now report the full 5.0.7 license number.

NOTES:    If you have an Openserver 5.0.7 Enterprise System license that
          states it is an "upgrade" license, and you have performed a fresh
          install you will follow the same steps above to   _remove_
          the evaluation license. Then, instead of just applying your
          5.0.7 license per the above instructions, you will need to first
          apply your pre-5.0.7 license; do the following:

From the License menu, choose "Add product or Service License".

Enter your license information as shown on your previous SCO Openserver Enterprise System 5.0.x (pre-5.0.7) Certificate of License and Authenticity.

Now you will need to go back to the License menu and choose "Add Product or Service License" again, and this time you enter the information as shown on your SCO Openserver Enterprise System 5.0.7 Certificate of License and Authenticity.

Exit the Scoadmin License manager and reboot the system

Running the uname -X command should now report the full 5.0.7 license number.

Also ensure you enter the correct license number required, for example if you remove the license and enter a 5.0.6 -> OSR6.0.0 Upgrade License but enter a 5.0.7 Enterprise License as the Upgraded license then you may see:

ERROR: Expected version 5.0 for SCO OpenServer Enterprise System. Received version 5.0.7 for SCO OpenServer 5.0.5 Enterprise System.

If there is any doubt then please check with SCO Support first.

From the Xinuos technical article database, record 125265. Reproduced with permission. The original is at www.sco.com/ta/125265, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.