Problem
I am trying to add a Standard 28800k modem to UnixWare 7 and the SCOadmin Modem Manager fails with a number of tcl errors relating to speed.
When I run "scoadmin modem" again there is no modem configured, yet I am unable to add a new modem. The Modem Manager says that there is one already there.
Cause
It is likely that the UART speed of your serial port is slow and the Modem Manager is unable to query the serial port at that speed.
Solution
Although Modem Manager refuses to add the modem, it will still add the appropriate modem entry into /usr/lib/uucp/Devices and /etc/uucp/Devices for any new modem selected.
It is recommended to change the speed from "Any" to the appropriate speed for that particular modem to obtain the best performance.
You can also change the speed of the serial port and reduce to 9600, for example, and select the "Standard 9600 Modem" from the list of supported modems.
If you've configured the modem to accept incoming and make outgoing calls then you can test by:
cu -l /dev/term/00m - assume the modem is on serial port 1.
AT
ATDT<number> - to check that the modem dials out.To check incoming connections, either dial the extension from a normal telephone to check that it answers or, dial in from another modem on another server or PC.
If the connection is made, and you don't see the login prompt but a number of different characters, then the problem is likely to be speed negotiation. Drop the speed of the incoming connecting modem to 9600.
NOTE: The UUCP cron will be enabled by default to run a number of admin
tasks on a regular basis and report this information to the "root"
account by email. If UUCP is not being used then deactivate these
entries in UUCP's cron. See also
ta107189, "What is cron, and how do I use it?"
ta103422, "What are UART and Serial I/O Chips?"ta109390, "How to add an unsupported modem to the SCO Modem Manager."
ta109641, "How to configure an on-demand outgoing PPP link on UnixWare 7."