Problem
I am trying to apply my SCO Maintenance Pack and the custom/pkgadd installation process hangs.
If I am in Single User mode then I try to Interrupt the process and it doesn't release the process and the only option is to reboot.
If I am in Multi-User mode then I can switch to another console and first kill -15 the process and if this fails then I kill -9 the process which I identify by running 'ps -ef'.
Cause
1. Your install media is bad either CD or image downloaded.
2. What you are installing from is damaged, such as CD/DVD-ROM or hard disk media.
3. Your server's memory, kernel tunables or resources are so low that the Maintenance cannot install.
Solution
It is recommmended to ensure you have a valid backup of your operating system before you start your Maintenance Upgrade.
The first thing to do is to:
For OpenServer5/6:Run "custom" and remove any 'attempt' of the installation by selecting the product in the window pane where the products are listed by pressing SPACE BAR next to it then selecting Remove Product in the window pane above.
For UnixWare7:Use "pkginfo -l" to determine if the package is installed and use "pkgrm" to remove it.
If the Maintenance removal failed then attempt another installation of the Maintenance.
Once you have removed the package, do not reboot until the Maintenance has been successfully installed and to do this either:
1. Check your media image download from www.sco.com/support/downloads.html with the "sum -r" value there.
2. Check the media the Maintenance is installed onto.
3. Ensure there are sufficient resources available on your server to install the maintenance, using "sar" to assist you.
4. Follow the documentation to rebuild your kernel manually prior to reboot to ensure all is well. Before doing this it is recommended to take a copy of the kernel in /stand to unix.before, for example.