Technical article 126468

I get the boot failure "adst70: command timed out [c10070d0] (ha=1)" after applying MP2 to my system.

OpenServer 6.0.0

Written · Last revised

Problem

I have applied OpenServer 6.0.0 Maintenance Pack 2 to my system and now when I reboot my system hangs while initializing hardware with the error:

adst70: command timed out [c10070d0] (ha=1)

Cause

This problem is caused by a known issue with interrupt routing on Hyperthreaded machines.

Solution

This problem has been reported to SCO Engineering.

You may be able to workaround the problem by disabling Hypethtreading. To do this enter:

ENABLE_JT=N

at the boot prompt. if this does allow the system to boot then you can add:

ENABLE_JT=n

to /etc/default/boot to avoid having to enter the command at the boot: prompt at each boot.

From the Xinuos technical article database, record 126468. Reproduced with permission. The original is at www.sco.com/ta/126468, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.