Technical article 126736

I get "The CD in the drive is unreadable" error when trying to install OpenServer 6 from CDROM

OpenServer 6.0.0

Written · Last revised

Problem

I am trying to install OpenServer 6.0.0 from CDROM.

I can boot from the CDROM but when I choose to install from the CD media I get a message saying that the CD in the drive is unreadable.

Cause

This problem may be caused by a device that does not conform properly to the ATAPI DMA specification.

Solution

To workaround this problem, restart the installation and press any key when the OpenServer 6 Boot Splash screen is displayed.

At the Boot: prompt that results enter:

ATAPI_DMA_DISABLE=Y

This should allow you to continue with the installation.

For more information on ATAPI_DMA_DISABLE and for details on disabling DMA on specific ATAPI devices please see the boot(HW) man page.

From the Xinuos technical article database, record 126736. Reproduced with permission. The original is at www.sco.com/ta/126736, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.