Technical article 126670

Installation of UnixWare 7.1.4/OpenServer 6.0.0 fails on system without floppy disk drive.

OpenServer 6.0.0UnixWare 7.1.4

Written · Last revised

Problem

Installation fails with red error screen, with various messages about IRQ problems or conflicts.

Cause

The installation reserves IRQs for legacy devices even if they are not present.

These IRQs include: 3 - serial port (asyc) 6 - floppy controller (fd) 7 - parallel port (mfpd)

Solution

If your system doesn't have these devices, then they should be removed from the DCU during the install, so that they won't get in the way of other devices that might be using these IRQs.

Check the BIOS of the server to determine this, if the BIOS supports IRQ assignment.

An alternative method that has worked on some systems is to boot the
system using the boot parameter "PSM=mps".   See boot(4) for further
information on using boot parameters.

From the Xinuos technical article database, record 126670. Reproduced with permission. The original is at www.sco.com/ta/126670, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.