Problem
Is there a Tape Media Compatibility Matrix for tapes?
Solution
For DDS/DAT visit:http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpg50457&locale=en_US&taskId=101&prodSeriesId=81997&prodTypeId=12169Which details:Overview:The DDS (Digital Data Storage) formats build on the 4 mm DAT (Digital Audio Tape) format to meet the more stringent needs of computer data storage. As the DDS technology has developed, so new standards have been produced, each allowing more data to be stored on a single cartridge. Briefly, the development of the DDS formats to date has been as follows:
DDS-1 - DDS-1 was originally called DDS. It used 60m and 90m cartridges and did not allow hardware data compression.
DDS1-DC DDS1-DC, or simply DDS-DC - extended DDS-1 to include hardware data compression. This typically doubled the capacity of a tape.
DDS-2 - DDS-2 included the features of DDS-1 and DDS-DC, but increased the amount of data that could be written to a single cartridge in two ways: It used longer, thinner tapes (120m). It wrote data in narrower tracks. Together these features meant that a DDS-2 tape could hold twice the data of a DDS-1 90m tape.
DDS-3 - DDS-3 stores data at twice the density of DDS-1 and DDS-2, and also allows more of the tape to be used for data. As a result, a DDS-3 (125m) tape holds three times the data of a DDS-2 tape.
DDS-4 - DDS-4 tape, at 150m, is longer than DDS-3 (125m) tape. It holds holds two-thirds more data than a DDS-3 tape.
DAT-72 - DAT-72 tapes are 170m long and data is written in narrower tracks, again increasing data density, enabling tapes to hold 80% more data than DDS-4 tapes.
DAT-160 - DAT-160 tapes are 154m long and data is written at a higher density than DAT-72, enabling the tapes to store up to 160GB of data.
Choosing Cartridges: To exploit the full potential of a DDS-format drive, matching cartridges should be used: DDS-3 cartridges for DDS-3 drives, DDS-4 cartridges for DDS-4 drives, and DAT 72 cartridges for DAT 72 drives.
This will allow the drives to store the maximum amount of data on a tape.
However, HP DDS drives are backward compatible. This means that, for example, a DAT 72 drive can read and write DDS-4 tapes. Note that it will use DDS-4 format, so the full advantage of DAT 72 will be lost. Drives are not forward compatible, so, for example, a DDS-4 drive cannot read or write a DAT 72 tape. It will simply eject it
DDS-1 StorageWorks Media(60m/90m) DDS-2 StorageWorks Media(DAT-8) DDS-3 StorageWorks Media(DAT-24) DDS-4 StorageWorks Media(DAT-40) DAT-72 StorageWorks Media DAT-160 StorageWorks MediaDDS1 DDS2 DDS3 DDS4 DAT-72 DAT-160HP Surestore 2000/5000 W/R No No No No NoHP Surestore/StorageWorks
DAT 8 W/R W/R No No No NoHP Surestore/StorageWorks
DAT 24/24x6 W/R W/R W/R No No NoHP StorageWorks DAT40
Hotplug No R Only W/R W/R No NoHP Surestore/StorageWorks
DAT 40/40x6 No W/R W/R W/R No NoHP StorageWorks DAT 24 USB No W/R W/R No No NoHP StorageWorks DAT 40 USB No W/R W/R W/R No NoHP StorageWorks DAT 72 USB No No W/R W/R W/R NoHP StorageWorks DAT-72
/ 72x6 No No W/R W/R W/R NoHP StorageWorks DAT-160 SCSI
Tape Drive No No No W/R W/R W/RHP StorageWorks DAT-160
USB Tape Drive No No No W/R W/R W/RWhere W/R means Write/Read.For LTO visit:http://www.imation.com/PageFiles/271/Ultrium_Compatibility.pdfLTO Cart Gen 1 Drive Gen 2 Drive Gen 3 Drive Gen 4 DriveGen 1 W/R @100GB W/R @100GB Read Only Not FunctionGen 2 Not Function W/R @200GB W/R @200GB Read OnlyGen 3 Not Function Not Function W/R @400GB W/R @400GBGen 4 Not Function Not Function Not Function W/R @800GBInformation was correct at time of writing.