Technical article 127479

Is there support for the p410i / p212i RAID controller included in HP Proliant G6 models?

OpenServer 6.0.0OpenServer 5.0.7UnixWare 7.1.4

Written · Last revised

Problem

Is there support for the p410i RAID controller included in HP Proliant G6 models?

Solution

There is no current support for the p410i controller on any SCO
platforms.  None of the PMC Sierra 6GB SAS controllers are supported,
which includes the p212i and p411i controllers.

Customers who wish to use SCO Operating Systems on G6 servers will need to order an optional RAID or SAS controller to use on these systems.

The following RAID/SAS controllers do have device support for SCO platforms:

SAS RAID HBAs (all use hpsas driver)
HP Smart Array E200/128 BBWC Controller
RAID 0, 1, 1+0, 5.                            411508-B21
HP Smart Array P400/256MB Controller
RAID 0, 1, 1+0, 5.                            405132-B21
HP Smart Array P400/512MB BBWC Controller
RAID 0, 1, 1+0, 5, 6.                         411064-B21
HP Smart Array E500/256MB Controller
RAID 0, 1, 1+0 standard, 5 optional.          435129-B21
Please note that this for external disks only.
          HP Smart Array P600/256 BBWC Controller
	  RAID 0, 1, 1+0, 5, 6.                         337972-B21
HP Smart Array P800/512MB BBWC Controller
RAID 0, 1, 1+0, 5, 6.                         381513-B21

SAS HBAs (uses mpt (6.0.0 and 7.1.4) / lsil (5.0.7) driver)

HP SC08Ge Host Bus Adapter                    488765-B21
HP SC44Ge Host Bus Adapter                    416096-B21
HP SC40Ge SAS HBA, FIO
RAID 0, 1.                                    449176-B21
NOTES:    As of 9/18/09, no G6 servers are Certified for SCO Platforms.

Besides the lack of driver support for the p410i controller, the systems should work and are being marked as Compatible as tested.

*Important Note*: Due to the above problem and others, there may be special installation and runtime procedures needed for G6 platforms.

Please see our hardware compatibility pages at:

http://wdb1.sco.com/chwp/owa/hch_search_form

for the model you are attempting to install on (or search for other G6 models) for potential necessary information/procedures/work- arounds.

From the Xinuos technical article database, record 127479. Reproduced with permission. The original is at www.sco.com/ta/127479, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.