Technical article 127062

Keystrokes are not being recognised correctly at install time on my USB Keyboard

OpenServer 6.0.0UnixWare 7.1.4

Written · Last revised

Problem

I am installing an SCO Operating System (OpenServer 6.0.0 or UnixWare 7.1.4 on a server that has a USB keyboard.

While in the Installation Query Manager (IQM) I have switched to the system console using:

<Alt><SysRq> <H>

and have then switched back to the IQM using:

<Alt><SysRq> <F1>

but now keystrokes such as <Enter>, <F1>, <F2> and <F3> no longer work.

Solution

This problem has been reported to SCO Engineering.

On a system where the problem has already occurred you can workaround the problem by pressing the <ALT> key after switching back to the IQM.

You can also avoid the problem in the first place by using:

<Ctrl><Alt><H>
to switch to the console and
<Ctrl><Alt><F1>
to switch back to the IQM.

From the Xinuos technical article database, record 127062. Reproduced with permission. The original is at www.sco.com/ta/127062, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.