Technical article 126619

My application, command or utility is not respecting the new 2007 US Daylight Saving Time changes.

OpenServer 6.0.0OpenServer 5.0.7UnixWare 7.1.4

Written · Last revised

Problem

I have noticed that the time being reported by applications, commands and/or utilities on my system is off by one hour and that the system has not changed to/from Daylight Saving Time (DST) on the correct day.

Cause

The most likely cause of your problem is that either:

1) You have not installed the Daylight Saving Time supplement for your Operating System

or

2) Your application was built with a libc library that is not aware of the new 2007 US Daylight Saving Time rules

Solution

If your system does not have the relevant 2007 DST patch applied then please apply the patch to see if it resolves the problem. The patches are:

OSS706c for OpenServer 6.0.0 which is available from:

https://ftp.scoexpert.com/openserver6/600/patches/oss706c/

PTF9052f for UnixWare 7.1.4 which is available from:

https://ftp.scoexpert.com/unixware7/714/patches/ptf9052f/

Maintenance Pack 5 for OpenServer 5.0.7 which is available from:

https://ftp.scoexpert.com/openserver5/507/mp/osr507mp5/

PTF9008b and PTF9009a for UnixWare 7.1.3 which are available at:

https://ftp.scoexpert.com/unixware7/713/patches/ptf9008b/
https://ftp.scoexpert.com/unixware7/713/patches/ptf9009a

If your application, command or utility is still displaying the incorrect time then SCO Services offers a range of services that can assist with assessing the impact and provision of fixes and workarounds for the DST issue including fixes on older unsupported SCO operating system releases.

For information on SCO Services please contact SCO Inside Sales at (800)726-6561.

From the Xinuos technical article database, record 126619. Reproduced with permission. The original is at www.sco.com/ta/126619, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.