Problem
Some systems with more than 32GB of RAM installed panic during OpenServer 6.0.0 installation (ISL).
Solution
If you have a system with more than 32GB of RAM installed, the system may panic with the message:
"PANIC: Out of KMA memory during startup"during initial system installation (ISL). To work around this problem, use a boot parameter to disable large memory during installation.
To disable large memory:Boot the system with the installation media. When the screen displays:
Bootstrap Command Processor Press <ENTER> to begin installation [? for help]
and a running timer showing the number of seconds until the installation begins automatically, press <SPACE> and enter the following string:
ENABLE_4GB_MEM=NO <ENTER>To continue with the installation, at the [boot] prompt enter:
boot <ENTER>The boot parameter 'ENABLE_4GB_MEM=NO' disables PAE (Physical Address Extension) mode and, consequently, memory above 4GB.
The effect of the boot parameter does not persist after the installation, so the system will reboot with PAE enabled and access to all licensed memory.
Note:Installed memory greater than 16GB may impact installation performance due to the large amount of Kernel Virtual Address Space consumed. Users may wish to use the 'ENABLE_4GB_MEM=NO' boot parameter during installation on any system with 16GB or more of memory.
See also
boot(HW)