Technical article 126680

Network card initialization fails with "dlbind: bad SAP" message in /tmp/inet.start.

OpenServer 6.0.0UnixWare 7.0.0UnixWare 7.0.1UnixWare 7.1.0UnixWare 7.1.1UnixWare 7.1.2UnixWare 7.1.3UnixWare 7.1.4Open UNIX 8

Written · Last revised

Problem

During system start up I see slink errors indicating my
network card failed initialization.  Checking the
/tmp/inet.start log also shows that the failure was
related to "dlbind: BAD SAP"
When checking `ifconfig -a` the network card is not listed.

Cause

This message indicates that the dlpi driver layer could not determine a valid media type for the device, which could be caused by either a hardware problem with the network card or some problem with the NIC driver installation.

Solution

As a first step, try removing and re-adding the network
card driver.  This has been reported to correct this problem.

See the exact driver instructions on how to "pkgrm" the existing driver and add the new one using "pkgadd" from the latest driver available from http://www.sco.com/support/download.html.

It is recommended to remove the entry for the NIC in "netcfg" first.

As a second step, try re-seating the card in a different slot.

If problems persist try replacing the card itself.

From the Xinuos technical article database, record 126680. Reproduced with permission. The original is at www.sco.com/ta/126680, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.