Problem
What has been updated/added in the 8.0.6c version of the nd package for OpenServer 6.0.0 and UnixWare 7.1.4?
Solution
The nd version 8.0.6c package provides fixes beyond the nd version 8.0.6b package.
This package can only be applied to an existing OpenServer 6.0.0 system with Maintenance Pack 2 applied or to a UnixWare 7.1.4 system with Maintenance Pack 3 applied.
This image is available at the following URLs:
https://ftp.scoexpert.com/unixware7/714/drivers
https://ftp.scoexpert.com/openserver6/600/driversHere is a complete list of NIC driver updates added in the nd version 8.0.6c package (beyond those available in the nd version 8.0.6b package):
bcme - Broadcom BCM5700 NetXtreme nic driver Updated from version 7.5.22 to 8.2.11
bcme MODIFICATION HISTORY
*************************
v8.2.11 (August 10, 2005)
===========================Fixes: ------------- 1) Problem : Driver fails SCO certification tests. 2) Problem : Tx statistic counters incorrect. 3) Problem : 5700 fails to initialize. 4) Problem : 5704S fails flow control test. 5) Problem : 5701 fails to receive traffic when configured to 10Mbps, half-duplex, link forced. 6) Problem : Serdes 325i devices not recognized correctly. 7) Problem : Flow control fails to work in "auto" mode. 8) Problem : 5714 devices do not fall back to forced link if PCS_SYNCED is detected. 9) Problem : Certification test fails after performing the symbol checking stage. 10) Problem: 5714 devices do not fall back to forced link if PCS_SYNCED is detected. 11) Problem: Jumbo frame size option missing on 5714 / 5715 devices. 12) Problem: Firmware version string missing product name on 5714 devices. 13) Problem: 5703B1S never gets link. 14) Problem: 5704S devices showing link up when link is still being negotiated. 15) Problem: Flow control automation test fails. 16) Problem: PCIE devices lock-up. 17) Problem: Link negotiation fails when 5751 LOM is connected back-to-back with another device. 18) Problem: Driver incorrectly limits the number of receive rules available for the 5714 family of devices. 19) Problem: ATI transmit timeout - "NETDEV WATCHDOG". 20) Problem: 5714 not detected. 21) Problem: ndstat -l reports strange link speeds. 22) Problem: Systems with more than one adapter refuse to accept configuration changes. 23) Problem: Firmware version not displayed for EEPROM devices. 24) Problem: Driver crashes. 25) Problem: ASF not supported. 26) Problem: Capacitive coupling and preserve preemphasis settings may be set incorrectly. 27) Problem: ndstat does not show the correct link speed. 28) Problem: Device fails to get link when connection is forced to 10Mbps. 29) Problem: 5704 LOM interfaces will not ping. 30) Problem: Force the NC150T to autonegotiate its linkspeed and duplex settings. 31) Problem: Driver freezes machine under stress. 32) Problem: Driver will not load on a BCM5700B2 33) Problem: Firmware version number not displayed on Shasta devices. 34) Problem: Machine crashes when doing UDP performance testing. 35) Problem: 5753 series devices have a banner string identifying the devices as "Unknown". 36) Problem: Performance considerably slower on shasta devices. 37) Problem: Jumbo frame support on some systems caused device counters to increment CRC errors. 38) Problem: 5714 device support needs to be removed for the 8.1b driver release. 39) Problem: Driver missing new HT-LE device IDs. 40) Problem: PLL clock unstable. 41) Problem: Preemphasis settings, set by the firmware, need to be preserved.
Enhancements:
-------------
1) Change : Remove 5714 and 5715 support from the driver.
2) Change : Added support for new HP NC32Xi products.
3) Change : Added 5715X support into driver.
4) Change : Added 5714X / 5780X support into driver.
5) Change : Added support for jumbo frames for 5714X and
HT2000 devices.
6) Change : Added support for 5714X and HT2000 devices.
7) Change : Added support for Baxter devices.
8) Change : Updated copyright strings.
9) Change : Added support for more NVRAM types.
10) Change : Added firmware version to banner string.-------------------------------------------------------------------------
I. InstallationWarning: Installing this driver overlays information in the
/etc/inst/nd/mdi directory without backing up prior versions (if they
existed). To restore prior versions, you must re-install the previous
nd/driver package which the original driver came from.To install on any installed OpenServer 6/UnixWare 7 system, follow the below steps.
1. Become root and create a new directory by typing:
$ su
Password: <type your root password>
# mkdir /tmp/nd
# cd /tmp/nd2. Download the nd.8.0.6c.image file to the newly created /tmp/nic directory on your machine.
3. Install the package on your machine:
# pkgadd -d /tmp/nd/nd.8.0.6c.image nd4. Use netcfg to optionally configure any new NIC cards newly supported in the nd driver package.
5. Reboot the system so any updates to the currently configured NIC drivers are completed.
------------------------------------------------------------------------
II. Software NotesThis driver package has been tested with and is supported on:
SCO UnixWare 7 Release 7.1.4 SCO OpenServer Release 6.0.0
HARDWARE: The following new cards supported in this version are:
From the bcme 8.2.11 driver:Broadcom BCM5704S NetXtreme Gigabit Ethernet Broadcom BCM575XF NetXtreme Gigabit Ethernet Broadcom BCM5780 NetXtreme Gigabit Ethernet Broadcom BCM5781 NetXtreme Gigabit Ethernet HP NC320i Integrated Gigabit Server Adapter HP NC324i Integrated Dual Port PCI Express Gigabit Server Adapter HP NC325i Integrated Dual Port PCI Express Gigabit Server Adapter HP NC326i Integrated Dual Port PCI Express Gigabit Server Adapter
NOTE: Should you see the error:WARNING: FAILED TO GET WIRESPEED PARAMETERfor the "bcme" Broadcom NIC then run "netcfg" and within the Advanced Settings for the Hardware configured, disable the Wirespeed option.
The Auto speed negioation should work fine.