Technical article 127002

On a Fujitsu Siemens PRIMERGY TX200-S4, the SATA CD-DVD/ROM drive is not recognized by SCO OpenServer 6.0.0 and UnixWare 7.1.4 during ISL installation?

OpenServer 6.0.0UnixWare 7.1.4

Written · Last revised

Problem

I have a Fujitsu Siemens PRIMERGY  that has a SATA based DVD-ROM
drive, attached to the onboard SATA controller.

When I try to install OSR6 or UW714, at ISL, the installer fails to recognize the DVD-ROM SATA drive.

Is there any support under SCO OSR6 and UW714 for SATA DVD-ROM?

Cause

There is no SCO OSR6 and UW714 driver support for the native SATA 6311ESB controller.

However, the controller can also be configured to run in AHCI mode and both SCO OpenServer 6 and UnixWare 7.1.4 have AHCI support.

Solution

You need set, in the system BIOS, the onboard SATA controller to AHCI mode in order to get the attached SATA DVD-ROM drive to be recognized by OSR6 and UW714 during the installation process ISL and post installation by using the "ahci" HBA driver.

Here is the sdiconfig output:
# sdiconfig -l
0:0,112,0: HBA : (mpt,1)LSI Logic 1068E 10414
  0,0,0:   DISK : LSILOGICLogical Volume 3000
2:0,6,0:   HBA : (ahci,1) AHCI SATA
  0,0,0:   CDROM : Optiarc DVD-ROM DDU1671S1.81 <- SATA DVD-ROM

From the Xinuos technical article database, record 127002. Reproduced with permission. The original is at www.sco.com/ta/127002, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.