Technical article 125961

OpenServer 5 : How do I add a print queue for a D-Link DP-300+ Printer

OpenServer 6.0.0OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

How do I add a print queue for a D-Link DP-300+ Printer
Server?  It is assumed that CUPS has not been installed here as the
default printing method for your OpenServer installation.

Solution

1.  Run "scoadmin printer"
2.  Run Printer -> Add REMOTE -> UNIX
3.  If the Remote Printing Service (mkdev rlp) has not
    already been installed then you will be prompted to install
    it at this point.
4.  Add your printer server in the /etc/hosts file, for
    example as:
192.168.0.5 dlink
5.  Select dlink as the Host and for the printer select
    the queue name as specified on the Print Server itself, such as:
PS-6E4623-P1
6.  Ensure:

[ ] Use extended remote printing protocol (only available if printer host is running SCO OpenServer Release 5 or above)is de-selected.

7.  To check that the queue is enabled run:
# lpstat -t
PS-6E4623-P1:
          queung is enabled
Port Name          PS-6E4623-P1
==============================
[Total Status]
Job                4
Sizes (KBytes)     268
Timeouts           0
------------------------------
[Current Job]
Printer Status     On line
Index              0
Protocol
Name
Spooling Bytes     0
Printing Bytes     0
==============================

From the Xinuos technical article database, record 125961. Reproduced with permission. The original is at www.sco.com/ta/125961, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.