Technical article 126981

OpenServer 6.0.0 installation is failing on large memory systems.

OpenServer 6.0.0

Written · Last revised

Problem

Attempting to install OpenServer 6.0.0 on a large memory system can intermittently fail with:

Error extracting file from cpio archive Error extracting file from archive Error opening target file "/path/to/some/file_name" Error forking decompression program Error opening pipe Out of stream resources

Selecting "Retry" may temporarily get past the problem but it will likely resurface later in the installation.

System hangs have also been observed during install on these large memory systems.

Solution

This has been reported to SCO Engineering.

To work around this problem, use a boot parameter to
disable large memory during installation.
To disable large memory:

Boot the system with the installation media. When the screen displays:

Bootstrap Command Processor Press <ENTER> to begin installation [? for help]

and a running timer showing the number of seconds until the installation begins automatically, press <SPACE> and enter the following string:

ENABLE_4GB_MEM=NO <ENTER>

To continue with the installation, at the [boot] prompt enter:

boot <ENTER>

The boot parameter 'ENABLE_4GB_MEM=NO' disables PAE (Physical Address Extension) mode and, consequently, memory above 4GB.

The effect of the boot parameter does not persist after the installation, so the system will reboot with PAE enabled and access to all licensed memory.

See also

Technical Article 126472, My SCO OpenServer 6.0.0 system panics during installation with "PANIC: Out of KMA memory during startup".

From the Xinuos technical article database, record 126981. Reproduced with permission. The original is at www.sco.com/ta/126981, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.