Technical article 126017

OpenServer 6.0 - How to restore video settings back to default settings?

OpenServer 6.0.0

Written · Last revised

Problem

Once the video manager has been run and changes have been made there
is no way to restore default settings easily.  In addition, there
is also no way to see what they originally were.

Solution

The summary below explains how to reset the video settings back to the defaults.

Making changes to the xorg.conf is normally done by manually
changing the file.  However, the steps below should assist in
restoring your defaults.  Before you start though:
# cp /etc/xorg.conf /etc/xorg.conf.orig

If during ISL "autoconfigure on" was selected for video, then the following steps will help you return to the default video setting.

1. # rm /etc/xorg.conf
2. # scologin stop;scologin start

If "autoconfigure off" was selected during ISL, the following steps will have to be taken to return to video defaults.

1. # scologin stop; /usr/X11R6/bin/X -configure
2. # cp /xorg.conf.new /etc/xorg.conf
3. # scologin start
NOTE:     It is recommended to:
# cp /etc/xorg.conf /etc/xorg.conf.orig
before running "scoadmin video".

From the Xinuos technical article database, record 126017. Reproduced with permission. The original is at www.sco.com/ta/126017, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.