Technical article 127708

OpenServer 6 shutdown hangs when using an Adaptec 2405 raid controller

OpenServer 6.0.0

Written · Last revised

Problem

On SCO 6 with Adaptec 2405 raid controller
System can sometimes/often hang at the end of the
shutdown process.
For init 6,

this means the system will not reboot.

For init 0,

This means you will not see the message: "Safe To Power Off". This hang is late enough in the shutdown process that all the filesystems are unmounted and there are no errors when you manually reboot.

HARDWARE: Adaptec 2405 raid controller

Solution

Upgrade to version 18252 of the aacraid driver from the Adaptec web site, by following sco TA 126663

Copy the 1.44 MB HBA driver to  /local/drivers/hba.image
# mount `marry -a /local/drivers/hba.img` /install
# pkgadd -d /install all
# umount /install
# marry -d /local/drivers/hba.img
# /etc/conf/bin/idbuild -B
# init 6

You can also use this driver in a fresh OpenServer 6 installation.

Should work from CD or floppy.
NOTES:    === from Steven "Mori" Moritsugu [mori@dtrbus.com]
          === DTR Business Systems 909/598-5721 x1610
          === www.dtrbus.com

From the Xinuos technical article database, record 127708. Reproduced with permission. The original is at www.sco.com/ta/127708, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.