Technical article 126663

UW7/OSR6:How do I install a new image file from hard disk rather than copying it to floppy first on a pre-installed server?

OpenServer 6.0.0UnixWare 7.1.3UnixWare 7.1.4

Written · Last revised

Problem

I have an existing server and I wish to upgrade my HBA driver.

How do I install a new image file from hard disk rather than copying it to floppy first?

I have downloaded the image to my hard disk and I do not wish to write the image file to floppy disk or I do not have a floppy disk.

Solution

Assuming you have downloaded the latest hba to: /local/drivers/hba.image

# mount `marry -a /local/drivers/hba.img` /install
# pkgadd -d /install all
When completed:
# umount /install
# marry -d /local/drivers/hba.img
# /etc/conf/bin/idbuild -B
# init 6
NOTE:     If you see the error:
ERROR file system type cannot be determined

then it's likely the image is corrupt.

From the Xinuos technical article database, record 126663. Reproduced with permission. The original is at www.sco.com/ta/126663, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.