Technical article 126682

OSR6 - HP ML310 G4 Serial ports not functioning

OpenServer 6.0.0

Written · Last revised

Problem

On the HP/Compaq ML 310 G attempting to run mkdev serial, mkdev modem, or use the scoadmin serial or modem managers, the built in serial port does not appear and the serial manager will exit with a "No such port" message.

HARDWARE: HP ML310 G4

Cause

The ML310 G4 has a virtual serial console for the integrated lights out. By default this is set on com1: and its existence prevents the O/S from detecting the hardware serial ports.

Solution

Use the BIOS to (F9 immediately on boot-up) to modify the serial ports so the Virtual Serial port is on COM3: using IRQ 5. Reboot the system and the COM1: and COM2: ports will then show up in the serial manager.

From the Xinuos technical article database, record 126682. Reproduced with permission. The original is at www.sco.com/ta/126682, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.