Technical article 126451

OSR6:TERM in Single-User-Mode is different from Multi-User-Mode

OpenServer 6.0.0

Written · Last revised

Problem

After the installation of Maintenance Pack 2 for OpenServer 6 the TERM variable has changed its default from at386-ie to ansi. But when I boot into Single-User-Mode TERM is still set to at386-ie and therefore semi-graphical tools like scoadmin or custom do not show up correctly.

Solution

In the file /.profile change the line:
eval `tset -m at386:${TERM:-at386-ie} -m
:\?${TERM:-at386-ie} -e -r -s -Q`
to
eval `tset -m at386:${TERM:-at386-ie} -m :\?${TERM:-ansi}
-e -r -s -Q`

This issue has been reported to SCO Engineering.

From the Xinuos technical article database, record 126451. Reproduced with permission. The original is at www.sco.com/ta/126451, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.