Technical article 126032

Permissions are incorrect on Packet Filter devices on a freshly installed SCO OpenServer 6.0.0.

OpenServer 6.0.0

Written · Last revised

Problem

Permissions are incorrect on Packet Filter devices on a freshly installed SCO OpenServer 6.0.0. This can result in a local user being able to modify the packet filter configuration of the server.

Solution

This issue has been reported to SCO Engineering and will be fixed in Maintenance Pack 1.

To manually correct the permissions, as root, edit the file:

/etc/conf/node.d/ipf

and append 0 0 600 to each line of the file. The result should look like:

ipf ipl c 0 0 0 600 ipf ipnat c 1 0 0 600 ipf ipstate c 2 0 0 600 ipf ipauth c 3 0 0 600 ipf ipsync c 4 0 0 600 ipf ipscan c 5 0 0 600 ipf iplookup c 6 0 0 600

To recreate the device nodes run the command:

/etc/conf/bin/idmknod

From the Xinuos technical article database, record 126032. Reproduced with permission. The original is at www.sco.com/ta/126032, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.