Technical article 126450

SCO OpenServer 6.0.0 installation panics in the initial boot stage of the installation on a Acer Altos G320 Dualcore Server

OpenServer 6.0.0

Written · Last revised

Problem

I am trying to install SCO OpenServer 6.0.0 on an Acer Altos G320 Intel dualcore CPU. But the installation panics right in the initial boot stage, therefore unable to install SCO OpenServer 6.0.0 on this server.

Solution

This has been fixed with SCO OpenServer 6.0.0 MP2 and the modified APCI parameter in the kernel.

Please follow the steps outlined below in order to by-pass the panic issue during the initial boot stage of the installation and getting the OpenServer 6.0.0 to recognize the two logical CPU (single Dualcore Intel CPU):

1- In the Acer altos G320 BIOS setting, make sure the parameter "SW Single Processor Mode" is set to "disable".

2- Install OpenServer 6.0.0 using the bootstring "PSM=atup". This will solve the panic issue.

3- After OSr6 installation, boot the system again with the bootstring "PSM=atup". Then install OSR6 Maintenance Pack 2 (MP2). Add the parameter "ACPI=Y" into the /stand/boot file.

4- Reboot the server. After SCO OSr6 is booted, it will detect both logical CPU (dualcore).

From the Xinuos technical article database, record 126450. Reproduced with permission. The original is at www.sco.com/ta/126450, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.