Problem
I'm trying to install OpenServer 6 on a Dell PowerEdge R710 with 32GB memory but right after the splash screen I get a message like
xAPIC not found, limiting system to 8 CPUsand the system reboots. Solution
Boot the system off the CD and at the command prompt type
ENABLE_4GB_MEM=Nand proceed with the normal installation.After the first reboot type in the above boot parameter again. Then install Maintenance Pack 4. Now you can reboot the system without the boot parameter.
NOTES: Check too that there is no BIOS setting enabled which might re-direct
the console to a different COM port and give the impression that after
the Splash Screen the console screen disappears.