Problem
It has been noticed that the default integrated raid controller,IBM ServerRAID 8k-l, that comes with the below IBM xSeries has a poor IO performance when setting Raid 0, 1, 10.
Even though the IBM ServerRAID 8k-l reports to have 32 MB cache.
HARDWARE: IBM xSeries:System x3400, Type 7973, any model System x3400, Type 7974, any model System x3400, Type 7975, any model System x3400, Type 7976, any model System x3550, Type 7978, any model System x3650, Type 7979, any model System x3655, Type 7985, any model System x3755, Type 8877, any model
Cause
The ServeRAID-8k-l does not contain cache memory.
The user may see there is 32 MB of memory (8k-l BIOS message), but that 32 MB of onboard memory is not being used for IO cache but for diagnostics and boot functions.
Solution
The ServerRAID 8k-l controller is really a very low end
raid controller designed to be used on hard disk that
will only contain the OS (where IO cache is not that
important) or data disks that contains data for read only.
Any heavy IO activities on the disks, then this controller
is the wrong choice.WARNING, default disk controller for the above machines comes with ServerRAID 8k-l.
It is therefore recommended to use the optional integrated IBM ServerRAID 8k, that comes with 256 MB Write-back cache memory and a battery module.
Therefore, if you intend to use one of the above IBM xSeries and want to have the internal HD's for Operating system only (and data disk for read only), then the ServerRAID 8k-l is the right choice.
If you plan to use the internal HD's for OS and heavy IO data disk, then the ServerRAID 8k is recommended.
NOTES: Check IBM:http://www.redbooks.ibm.com/abstracts/tips0054.htmlfor more details on the IBM SeverRAID cards.