Technical article 127072

Tips for installing OpenServer 6.0.0 on the Intel Modular Server Compute Module MFS5000SI

OpenServer 6.0.0

Written · Last revised

Problem

I would like to install OpenServer 6.0.0 on my Intel Modular Server Compute Module (Model number: MFS5000SI) and would like to know what issues I need to be aware of during the installation process.

Solution

When installing SCO OpenServer 6.0.0 on the Intel Server Compute Module (Model: MFS5000SI) SCO recommend that you do the following:

1) The MFS5000SI only has 2 USB ports. You will need to use a USB hub during installation as you will need to connect:

- A USB Mouse - A USB Keyboard - A USB CDROM/DVD drive

2) Before installing an operating system, you must first configure storage and networking via the management module¿s graphical user interface (GUI). Please see the "Configuring the Server Chassis" chapter of the Intel Modular Server User Guide for details on how to do this.

3) During the install

- when asked if you want to load additional HBA drivers you will need to install the OpenServer 6 MP3 Device Driver Supplement media before any HBA drivers from the media kit.

The MP3 Device Driver Supplement can be downloaded from:

http://www.sco.com/support/update/download/release.php?rid=312

- you should defer network configuration as the network card in the server is not supported by the installation media.

- when the installation is complete and you are prompted to

"Press any key to reboot"

you must do a "cold boot" of the server (ie you must press the power on/off button) for the installation to complete successfully.

Please note:  If you have no further need for the CDROM/DVD drive on
the server you can remove it and the USB hub.

4) After the cold boot you need to perform the following tasks:

- Install OpenServer 6.0.0 Maintenance Pack 3 (MP3). MP3 is available to downloaded from:

http://www.sco.com/support/update/download/release.php?rid=295

and is also part of the latest OpenServer 6.0.0 media kit.

- Install the latest nd driver package from:

http://www.sco.com/support/update/download/release.php?rid=347

- Run the SCOadmin Network Configuration Manager (netconfig) to configure the network card.

See also

For more information on the Intel Server Compute Module please see:

http://www.intel.com/products/server/modular-server/server-compute-module/server-compute-module-overview.htm

From the Xinuos technical article database, record 127072. Reproduced with permission. The original is at www.sco.com/ta/127072, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.