Problem
My attempt to install UnixWare 7.1.x / Openserver 6 is failing with a red box that reads:
The installation has been aborted. To recover from this error you must restart the installation.
Or, my installation is failing with no error. How can I determine what went wrong?
Solution
It is possible to turn on Initial System Load (ISL) debugging by entering the boot parameter:
IVAR_DEBUG_ALL=1To do this, restart the installation from the beginning and when the UnixWare 7 or OpenServer 6 logo flashes on the screen, press the space bar.
Type in the boot parameter mentioned above and press <Enter>. Then type "boot" and press <Enter> again. This will continue the installation with ISL script debugging turned on.
This will place files in /tmp and /tmp/log which will track what
is happening during each of the installation scripts. When the
failure occurs, preserve the contents of /tmp. There may also be
logs in /mnt/isl/log that will need to be preserved.In order to copy these files from your system, insert a UNIX-formatted floppy into the floppy drive and press <Alt><SysRq> H, which will bring you to a character screen with a VT0> prompt. Next, type the following (this writes the logfiles to the floppy):
find /tmp /mnt/isl/log -type f -print | cpio -ocv -O /dev/rdsk/f03htSend these files to your technical support provider, along with as much information about the system as you can find, such as CPU, RAM size, disk size, number and type of partitions, HBA, and so on. The files may be extracted by typing:
cpio -icuvdI /dev/rdsk/f03ht See also
ta110237, "What is SLS ptf7425b, the UnixWare Install Supplement for UnixWare 7.1.0?"