Technical article 127603

UW7/OSR6:I have no access to networking and I see the following from my server during it's boot process: Warning:dlpiopen: must have exactly 1 'net0' entry in resmgr

OpenServer 6.0.0UnixWare 7.1.4

Written · Last revised

Problem

Warning:dlpiopen: must have exactly 1 'net0' entry in resmgr error: Bind to port 22 on :: failed : Network is unreachable. lochd[1849] myserver: server not responding for clnt_create : RPC : unable to receive

Solution

There are two known instances when this can occur:

Either there is no entry for net0 or there is more than one.

To determine this then run:
# resmgr | grep net0

If the networking entry is missing then add it with:

"netcfg"
Add the NiC but if there is already one listed then after making a
note of the IP configuration, it is recommended to first remove the
current NiC entry then re-add it with the correct information then
reboot the server.

If there is more than one entry for net0, then you have to run:

# resmgr -r -m net0   # run it until it fails
# /etc/conf/bin/idconfupdate -f
# /etc/conf/bin/idbuild -B
# init 6

Then re-add the NiC as suggested above.

From the Xinuos technical article database, record 127603. Reproduced with permission. The original is at www.sco.com/ta/127603, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.