Technical article 127115

WARNING: bcme: does not verify brdid=0x14E4165A adding a Broadcom 5722 NIC

OpenServer 6.0.0UnixWare 7.1.4

Written · Last revised

Problem

I installed Network Drivers (nd) Package Version 8.0.6g (osr600) from http://www.sco.com/support/update/download/release.php?rid=347 or Network Drivers (nd) Package Version 8.0.6g (uw714) from http://www.sco.com/support/update/download/release.php?rid=348

NOTE:     This problem is also seen with nd Package Version 8.0.6h

After installing this, I attempted to configure my Broadcom 5722 NIC through the SCOadmin Network Configuration Manager. While the card was autodetected, during the installation a message is printed to the screen and in the system logs:

WARNING: bcme: does not verify brdid=0x14E4165A

This message is also seen on boot after the card has been added to the system. Networking does not function properly.

Solution

This has been reported to SCO Engineering.

This can be worked around by installing the 10.4.5 driver from SCO's support ftp site at:

ftp://ftpput.sco.com/tmp/support/nd.806h/bcme-10.4.5/bcme-10.4.5.pkg

This driver will work on both osr600 and uw714.

From the Xinuos technical article database, record 127115. Reproduced with permission. The original is at www.sco.com/ta/127115, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.