Technical article 126833

What driver do I need for my HP SCSI, SAS, or Fibre Channel storage controller?

OpenServer 6.0.0OpenServer 5.0.7UnixWare 7.1.4

Written · Last revised

Problem

I need to find the correct driver for my HP (Hewlett Packard) SCSI, SAS, or Fibre Channel storage controller, and I need to know where HP recommends I obtain the driver.

Solution

HP maintains a page on their website listing currently
supported storage controllers and the names and version
numbers of their associated drivers for SCO supported
operating systems releases.  In addition, they provide
information on where to obtain the latest drivers.

To view the matrix for HP storage controllers and drivers on currently supported SCO operating system releases, go to:

http://h71028.www7.hp.com/enterprise/downloads/SCO%20Driver%20Support%20Matrix.pdf

Alternatively, go to the top-level URL for information on SCO support on the HP website:

http://hp.com/go/sco

and click on the "SCO UNIX Support" link and then click on "View the HP ProLiant Driver Support Matrix".

NOTES:    When connecting SAS controllers, such as the HP Smart Array P400
          controller, using the HP 'hpsas' driver from the HP Extended Feature
          Supplement (EFS), it is necessary to ensure BOTH SAS Cables are
          connected to the Drive Bay otherwise it is likely you will see
          "0 Logical Volumes" detected by the controller's BIOS at boot time.
NOTES:    It is also recommended to ensure a SAS Tape is connected to a
          separate SAS Controller, eg HP Ultra3 (LSI) Controller and not
          connect a tape to the SAS Controller controlling the hard disks.

From the Xinuos technical article database, record 126833. Reproduced with permission. The original is at www.sco.com/ta/126833, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.