Problem
What HBA drivers are included by default with the OpenServer 6.0.0 installation Media?
Solution
The following drivers are available as part of the installation media for OpenServer 6.0.0. Those marked with an '(*)' are part of the OpenServer 6.0.0 CD Boot Image, those not marked need to be extracted from the OpenServer 6.0.0 CD1 during the installation:
aacraid(*) Adaptec SCSI RAID 2120S/2200S/2130S/2230S and
Serial ATA RAID 2410SA/2810SA/21610SA HBAs
adpu320(*) Adaptec Ultra320 29320 Family PCI SCSI HBAs
adsa Adaptec AHA-274x/AIC-7770 EISA SCSI HBAs
adsb(*) Adaptec AIC-789x/AHA-294xU2x/295xU2x/AHA-395xU2x
7800 Family PCI Ultra 2 SCSI HBAs
adsc Adaptec AHA-154x/AHA-164x/AHA-174x SCSI HBAs
adse Adaptec AHA-174x EISA SCSI HBAs
adsl(*) Adaptec AIC-7560/AIC-78xx/AHA-29xx/AHA-39xx/AHA-49xx
7800 Family PCI SCSI HBAs
adss Adaptec AHA-15x0 6X60 SCSI HBAs
adst70(*) Adaptec AIC-789xA/AHA-29160/39160 Ultra160 Family
PCI SCSI IHV HBAs
ahci(*) AHCI v1.0-compliant SATA HBAs, including controllers
based on Intel ICH6M,ICH6R,ICH7M & ICH7R chipsets.
amd AMD PCI SCSI HBAs
blc BusLogic SCSI HBAs
c8xx(*) LSI Logic/Symbios 53c8xx/53c1010/53c1510 PCI SCSI HBAs
ciss(*) Compaq Smart Array 5300/5i/532 HBAs
cpqsc(*) Compaq Wide-Ultra SCSI HBAs
dak DAC 960, eXtremeRAID, and AcceleRAID SCSI HBAs
dpt DPT 2011/2012/2021/2022/2122/2322 SCSI HBAs
flashpt BusLogic FlashPoint PCI SCSI HBAs
hpsas(*) HP Smart Array P600 HBA
i2oOSM(*) Intel I2O Block Storage and SCSI OSM HBAs
ida(*) Compaq SMART Array Controller HBAs
ide(*) Generic IDE/ATAPI HBAs
iir(*) Intel Integrated RAID (IIR) HBAs
mega(*) MEGA SCSI HBAs
mpt(*) LSI Logic PCI to SCSI and Fibre Channel HBAs
qlc1020 QLogic QLA10xx PCI SCSI HBAs
qlc12160 QLogic QLA12160 PCI SCSI HBAs
qlc1280 QLogic QLA1280 PCI SCSI HBAs
qlc2100 QLogic QLA2100 PCI Fibre Channel HBAs
qlc2200(*) QLogic QLC2200 Fibre Channel IHV HBAs
qlc2300(*) QLogic QLC2300 Fibre Channel IHV HBAs
rstmp EMC Symmetrix Disk Restamp Driver for EMC Symmetrix
RAID storage systemsFor newer versions of many of the drivers listed above please see the Device Driver section of:
http://www.sco.com/support/update/download/product.php?pfid=12&prid=20These drivers can be added post install with the command:
# pkgadd -d cdrom1 <package name> See also
http://osr600doc.xinuos.com/en/GetStart/gsgC.HWconfig.html#gsgC.HWconfig.HBAsupp