Technical article 128023

What is OpenSSL for SCO OpenServer 5 Definitive?

OpenServer Definitive 2018

Written

Problem

What problems are fixed by OpenSSL for SCO OpenServer 5 Definitive?

Solution

Contains the latest OpenSSL long term support version openssl-1.0.2u, an open source toolkit for SSL/TLS.

Changes between openssl-1.0.2ub_5D_vol.tar and openssl-1.0.2uc_5D_vol.tar
      Patched for CVE-2020-1971

Changes between OpenSSL 1.0.2t and OpenSSL 1.0.2u [20 Dec 2019]

* Fixed an an overflow bug in the x64_64 Montgomery squaring procedure used in exponentiation with 512-bit moduli (CVE-2019-1551)

Changes between 1.0.2s and 1.0.2t [10 Sep 2019]
*) For built-in EC curves, ensure an EC_GROUP built from the curve name is
   used even when parsing explicit parameters, when loading a serialized key
   or calling `EC_GROUP_new_from_ecpkparameters()`/
   `EC_GROUP_new_from_ecparameters()`.
   This prevents bypass of security hardening and performance gains,
   especially for curves with specialized EC_METHODs.
   By default, if a key encoded with explicit parameters is loaded and later
   serialized, the output is still encoded with explicit parameters, even if
   internally a "named" EC_GROUP is used for computation.
   [Nicola Tuveri]

*) Compute ECC cofactors if not provided during EC_GROUP construction. Before this change, EC_GROUP_set_generator would accept order and/or cofactor as NULL. After this change, only the cofactor parameter can be NULL. It also does some minimal sanity checks on the passed order. (CVE-2019-1547) [Billy Bob Brumley]

*) Fixed a padding oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey. An attack is simple, if the first CMS_recipientInfo is valid but the second CMS_recipientInfo is chosen ciphertext. If the second recipientInfo decodes to PKCS #1 v1.5 form plaintext, the correct encryption key will be replaced by garbage, and the message cannot be decoded, but if the RSA decryption fails, the correct encryption key is used and the recipient will not notice the attack. As a work around for this potential attack the length of the decrypted key must be equal to the cipher default key length, in case the certifiate is not given and all recipientInfo are tried out. The old behaviour can be re-enabled in the CMS code by setting the CMS_DEBUG_DECRYPT flag. (CVE-2019-1563) [Bernd Edlinger]

*) Document issue with installation paths in diverse Windows builds

'/usr/local/ssl' is an unsafe prefix for location to install OpenSSL binaries and run-time config file. (CVE-2019-1552) [Richard Levitte]

Changes between 1.0.2r and 1.0.2s [28 May 2019]

*) Change the default RSA, DSA and DH size to 2048 bit instead of 1024. This changes the size when using the genpkey app when no size is given. It fixes an omission in earlier changes that changed all RSA, DSA and DH generation apps to use 2048 bits by default. [Kurt Roeckx]

*) Add FIPS support for Android Arm 64-bit

Support for Android Arm 64-bit was added to the OpenSSL FIPS Object Module in Version 2.0.10. For some reason, the corresponding target 'android64-aarch64' was missing OpenSSL 1.0.2, whence it could not be built with FIPS support on Android Arm 64-bit. This omission has been fixed. [Matthias St. Pierre]

Changes between 1.0.2q and 1.0.2r [26 Feb 2019]
*) 0-byte record padding oracle

If an application encounters a fatal protocol error and then calls SSL_shutdown() twice (once to send a close_notify, and once to receive one) then OpenSSL can respond differently to the calling application if a 0 byte record is received with invalid padding compared to if a 0 byte record is received with an invalid MAC. If the application then behaves differently based on that in a way that is detectable to the remote peer, then this amounts to a padding oracle that could be used to decrypt data.

In order for this to be exploitable "non-stitched" ciphersuites must be in use. Stitched ciphersuites are optimised implementations of certain commonly used ciphersuites. Also the application must call SSL_shutdown() twice even if a protocol error has occurred (applications should not do this but some do anyway).

This issue was discovered by Juraj Somorovsky, Robert Merget and Nimrod Aviram, with additional investigation by Steven Collison and Andrew Hourselt. It was reported to OpenSSL on 10th December 2018. (CVE-2019-1559) [Matt Caswell]

*) Move strictness check from EVP_PKEY_asn1_new() to EVP_PKEY_asn1_add0(). [Richard Levitte]

Changes between 1.0.2p and 1.0.2q [20 Nov 2018]
*) Microarchitecture timing vulnerability in ECC scalar multiplication

OpenSSL ECC scalar multiplication, used in e.g. ECDSA and ECDH, has been shown to be vulnerable to a microarchitecture timing side channel attack. An attacker with sufficient access to mount local timing attacks during ECDSA signature generation could recover the private key.

This issue was reported to OpenSSL on 26th October 2018 by Alejandro Cabrera Aldaya, Billy Brumley, Sohaib ul Hassan, Cesar Pereida Garcia and Nicola Tuveri. (CVE-2018-5407) [Billy Brumley]

*) Timing vulnerability in DSA signature generation

The OpenSSL DSA signature algorithm has been shown to be vulnerable to a timing side channel attack. An attacker could use variations in the signing algorithm to recover the private key.

This issue was reported to OpenSSL on 16th October 2018 by Samuel Weiser. (CVE-2018-0734) [Paul Dale]

*) Resolve a compatibility issue in EC_GROUP handling with the FIPS Object Module, accidentally introduced while backporting security fixes from the development branch and hindering the use of ECC in FIPS mode. [Nicola Tuveri]

Changes between 1.0.2o and 1.0.2p [14 Aug 2018]
*) Client DoS due to large DH parameter

During key agreement in a TLS handshake using a DH(E) based ciphersuite a malicious server can send a very large prime value to the client. This will cause the client to spend an unreasonably long period of time generating a key for this prime resulting in a hang until the client has finished. This could be exploited in a Denial Of Service attack.

This issue was reported to OpenSSL on 5th June 2018 by Guido Vranken (CVE-2018-0732) [Guido Vranken]

*) Cache timing vulnerability in RSA Key Generation
The OpenSSL RSA Key generation algorithm has been shown to be vulnerable to
a cache timing side channel attack. An attacker with sufficient access to
mount cache timing attacks during the RSA key generation process could
recover the private key.

This issue was reported to OpenSSL on 4th April 2018 by Alejandro Cabrera Aldaya, Billy Brumley, Cesar Pereida Garcia and Luis Manuel Alvarez Tapia. (CVE-2018-0737) [Billy Brumley]

*) Make EVP_PKEY_asn1_new() a bit stricter about its input.  A NULL pem_str
   parameter is no longer accepted, as it leads to a corrupt table.  NULL
   pem_str is reserved for alias entries only.
   [Richard Levitte]

*) Revert blinding in ECDSA sign and instead make problematic addition length-invariant. Switch even to fixed-length Montgomery multiplication. [Andy Polyakov]

*) Change generating and checking of primes so that the error rate of not being prime depends on the intended use based on the size of the input. For larger primes this will result in more rounds of Miller-Rabin. The maximal error rate for primes with more than 1080 bits is lowered to 2^-128. [Kurt Roeckx, Annie Yousar]

*) Increase the number of Miller-Rabin rounds for DSA key generating to 64. [Kurt Roeckx]

*) Add blinding to ECDSA and DSA signatures to protect against side channel attacks discovered by Keegan Ryan (NCC Group). [Matt Caswell]

*) When unlocking a pass phrase protected PEM file or PKCS#8 container, we now allow empty (zero character) pass phrases. [Richard Levitte]

*) Certificate time validation (X509_cmp_time) enforces stricter compliance with RFC 5280. Fractional seconds and timezone offsets are no longer allowed. [Emilia Käsper]

References
==========
See OpenSSL release notes at
https://www.openssl.org/news/openssl-1.0.2-notes.html
Features Added to this package
---------------------------------
  1. /usr/lib/openssl/certs/xinuos-ca-bundle.crt certificate bundle is provided
     for your convenience. See text starting at line 210 of that file.

If /usr/lib/openssl/certs/ca-bundle.crt does not exist at install time, xinuos-ca-bundle.crt will be copied to ca-bundle.crt

Xinuos makes no warranties as to the trustworthiness or RFC 3647 compliance of the certification authorities whose certificates are included in this package.

Assessment and verification of trust is the complete responsibility of the system administrator.

Contents
--------
          openssl-1.0.2uc_5D_vol.tar
MD5 (openssl-1.0.2uc_5D_vol.tar) = 4557a3382e7547a734126155e2e8afe1
SHA256(openssl-1.0.2uc_5D_vol.tar)= ab99eb31139493e8533ecf2d40f3255f285197eb328e19e9ead07528d5994c4c

This supplement can be installed on the following SCO OpenServer releases:

SCO OpenServer 5 2018 (D2M1)
----------------------------------------------------------
I. Software Notes and Recommendations

1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative.

----------------------------------------------------------
II. Installation Instructions
To install OpenSSL follow these steps:
1. Login as root

2. Create an empty directory, such as /tmp/openssl, to which the file will be downloaded.

3. Download the OpenSSL file openssl-1.0.2uc_5D_vol.tar to the
   directory created in step 2.  After the download is complete,
   change to the directory created in step 2 and run the following
   to extract the media image files:
tar xvf openssl-1.0.2uc_5D_vol.tar

4. Run the Software Manager with the command:

scoadmin software

or double-click on the Software Manager icon in the desktop.

5. Pull down the "Software" menu and select "Install New".

6. When prompted for the host from which to install, choose the local machine and then "Continue".

7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".

8. When prompted for the "Image Directory", enter "/tmp/openssl" (or the directory where you placed the OpenSSL file openssl-1.0.2uc_5D_vol.tar in step 2) and choose "OK."

9. When prompted to select software to install, make sure that
   the "OpenSSL" entry is highlighted.  Choose "Install".
10. Installation of Support Level Supplement (SLS) OpenSSL is now
    complete.  To exit the Software Manager, select "Exit" from
    the "Host" menu.

11. Once the installation has completed, you can remove or archive the OpenSSL file openssl-1.0.2uc_5D_vol.tar the media image files, and the containing directory created in step 2.

12. There is no need to reboot the system after installing this
    package.  However, if your system is running any libraries
    or commands that are contained in this package, then these
    programs will continue to run with the old versions of these
    libraries or commands until the system is rebooted.
Note that when all necessary patches have been installed, it
is good practice to reboot the system at the earliest
opportunity.  This will ensure that no programs continue to run
with the old libraries or commands.
----------------------------------------------------------
III. Removal Instructions

Note: Many other packages require this library so it would be unwise to remove this package.

From the Xinuos technical article database, record 128023. Reproduced with permission. The original is at www.sco.com/ta/128023, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.