Problem
What problems are fixed by Support Level Supplement (SLS) OSS702A, the OpenServer 6.0.0 pkgadd Supplement for OpenServer 6.0.0 with MP1 applied?
Solution
OSS702A addresses the following problems with the pkgadd toolset:
- fz532887: When removing a package from a system with MP1 applied you get the error:
: is not an identifier UX:pkgremove: WARNING: e-mail notification may have failed
- fz532895: installf -f fails with the error:
installf: ERROR: bad entry read in contents file pathname=/tmp problem=illegal value for mode UX:pkginstall: ERROR: postinstall script did not complete successfully.
- fz532013: Added UnixWare 7.1.4 features to the pkgadd toolset
- pkginstall command coredumps.- package installation scripts were not able to find binaries like
ls(C), cp(C) etcThis supplement can be installed on the following SCO OpenServer releases:
SCO OpenServer Release 6.0.0 with Maintenance Pack 1----------------------------------------------------------I. Software Notes and Recommendations1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative.
----------------------------------------------------------II. Installation InstructionsTo install OSS702A follow these steps:1. Download the OSS702A media image file from:
https://ftp.scoexpert.com/openserver6/600/patches/oss702a2. Place the files in the /tmp directory.
3. Run the Software Manager with the command:
# scoadmin softwareor double-click on the Software Manager icon in the desktop.
4. Pull down the "Software" menu and select "Install New".
5. When prompted for the host from which to install, choose the local machine and then "Continue".
6. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".
7. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL files in step 2) and choose "OK".
8. When prompted to select software to install, make sure that
the "OSS702A" entry is highlighted. Choose "Install".9. Installation of SLS OSS702A is now complete. To exit the
Software Manager, select "Exit" from the "Host" menu.----------------------------------------------------------III. Removal InstructionsNote: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.
1. Log in as root.2. Execute the command:# scoadmin softwareordouble-click on the Software Manager icon in the desktop.
3. Highlight the "OSS702A" entry.4. Pull down the "Software" menu and select "Remove Software".
5. Once the removal finishes, quit the Software Manager.
Removal of SLS OSS702A is now complete.