Problem
What is Security Supplement p535243, the BIND 9.4-ESV Update for OpenServer 6.0.0?
Solution
The supplement brings Bind 9 up to date with the latest security
fixes and also addresses an issue that can cause dig(ADMN) and
nslookup(ADMN)to hang under certain circumstances.What follows is the Security Advisory for this fix:
______________________________________________________________________________SCO Security AdvisorySubject: BIND 9.4_ESV Update for OpenServer 6.0.0
Advisory number: SCOSA-2010.2
Issue date: 7th April 2010
Cross reference: fz535243
CVE-2009-0696, CVE-2009-4022 and CVE-2010-0097
______________________________________________________________________________1. Problem DescriptionSecurity Supplement p535243, the BIND 9.4-ESV Update for OpenServer 6.0.0 addresses the following issues:
BIND 9 DNSSEC validation code could cause bogus NXDOMAIN responses CVE: CVE-2010-0097 CERT: VU#360341
BIND 9 Cache Update from Additional Section CVE: CVE-2009-4022 CERT: VU#418861
BIND Dynamic Update DoS
CVE: CVE-2009-0696
CERT: VU#7251882. Vulnerable Supported VersionsSystem Package
----------------------------------------------------------------------
OpenServer 6.0.0 Maintenance Pack 43. SolutionThe proper solution is to install the relevant package below.
4. OpenServer 6.0.0This patch should only be installed on OpenServer 6.0.0 systems with Maintenance Pack 4 installed.
4.1 Location of Fixed Binarieshttps://ftp.scoexpert.com/openserver6/600/security/p535243c_osr6/4.2 VerificationMD5 (p535243c_vol.tar) = 79e9fdd38119b8c2a9f62dddc12d1519md5 is available for download fromhttps://ftp.scoexpert.com/security/tools4.3 Installation InstructionsTo install P535243C follow these steps:1. Login as root2. Create an empty directory, such as /tmp/p535243c, to which the patch will be downloaded.
3. Download the P535243C patch file p535243c_vol.tar to the directory created in step 2.
4. After the download is complete, change to the directory containing the p535243c_vol.tar file and run the following to extract the media image files:
tar xvf p535243c_vol.tar5. Run the Software Manager with the command:
scoadmin softwareor double-click on the Software Manager icon in the desktop.
6. Pull down the "Software" menu and select "Install New".
7. When prompted for the host from which to install, choose the local machine and then "Continue".
8. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".
9. When prompted for the "Image Directory", enter "/tmp/p535243c" (or the directory where you placed the P535243C patch file p535243c_vol.tar in step 2) and choose "OK."
10. When prompted to select software to install, make sure that
the "P535243C" entry is highlighted. Choose "Install".
Once installation is complete, select "OK".11. Installation of Escalation Supplement P535243C is now complete. To exit the Software Manager, select "Exit" from the "Host" menu.
12. Once the installation has completed, you can remove or
archive the P535243C patch file p535243c_vol.tar, the
media image files, and the containing directory created
in step 2.13. There is no need to reboot the system after installing this
package. However, if your system is running any libraries
or commands that are contained in this package, then these
programs will continue to run with the old versions of these
libraries or commands until the system is rebooted.Note that when all necessary patches have been installed, it
is good practice to reboot the system at the earlier
opportunity. This will ensure that no programs continue to run
with the old libraries or commands.4.4 Removal InstructionsNote: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.
1. Log in as root.2. Execute the command:scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Highlight the "P535243C" entry.4. Pull down the "Software" menu and select "Remove Software".
5. Once the removal finishes, quit the Software Manager.
6. It is not necessary to reboot your system immediately. The system will continue to run with the routes defined by the updated route command until the next reboot.
5. ReferencesSCO security resources:
http://www.sco.com/support/download.htmlSCO security advisories via email
http://www.sco.com/support/forums/security.htmlThis security fix closes SCO incidents fz535243, fz535905, fz535909.
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0097
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-4022
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-06966. DisclaimersSCO is not responsible for the misuse of any of the information we provide on this website and/or through our security advisories. Our advisories are a service to our customers intended to promote secure installation and use of SCO products.
7. AcknowledgmentsN/A