Problem
What problems are fixed by Support Level Supplement (SLS) OSS683A, the OpenServer 5 Definitive 2018 (D2M1) Supplement?
Solution
OSS683A provides these fixes:1. Fix a lock timeout panic in shlock_str_qnext.OSR5-1682. Initialize three RTCSTIME variables which are needed by the PSM
routines. Previously, invalid time settings at boot sometimes
causes a system hang.OSR6-148This supplement can be installed on the following SCO OpenServer releases:
SCO OpenServer 5 Definitive 2018----------------------------------------------------------I. Software Notes and Recommendations1. If you have any questions concerning this supplement, please
contact your Xinuos software supplier or your Xinuos Support
Representative.----------------------------------------------------------II. Installation InstructionsTo install OSS683A follow these steps:1. Login as root2. Create an empty directory, such as /tmp/oss683a, to which the patch will be downloaded.
3. Download the OSS683A patch tar file oss683a_vol.tar to the
directory created in step 2. Unwind the tar file in that
directorytar -xf oss683a_vol.tar4. Run the Software Manager with the command:
scoadmin softwareor double-click on the Software Manager icon in the desktop.
5. Pull down the "Software" menu and select "Install New".
6. When prompted for the host from which to install, choose the local machine and then "Continue".
7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".
8. When prompted for the "Image Directory", enter "/tmp/oss683a" (or the directory where you unwound the OSS683A patch file oss683a_vol.tar in step 3) and choose "OK."
9. When prompted to select software to install, make sure that
the "OSS683A" entry is highlighted. Choose "Install".10. Once installation of Escalation Supplement OSS683A is
complete, exit the Software Manager, by selecting "Exit"
from the "Host" menu.11. Once the installation has completed, you can remove or archive the OSS683A patch and the containing directory created in steps 2 and 3.
12. You will need to reboot your system for all changes to take effect.
----------------------------------------------------------III. Removal InstructionsNote: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.
1. Log in as root.2. Execute the command:scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Pull down the "View" menu and select "View Patches".
4. Highlight the "OSS683A" entry.5. Pull down the "Software" menu and select "Remove Software".
6. Once the removal finishes, quit the Software Manager.
7. You will need to reboot your system for all changes to take effect.
----------------------------------------------------------IV. Contents/etc/conf/pack.d/str/Driver.o
/etc/setclk
/etc/setclock----------------------------------------------------------(C) Copyright 2020 Xinuos, Inc. All rights reserved.