Problem
What problems are fixed by Support Level Supplement (SLS) OSS683B, the OpenServer 5 Definitive 2018 (D2M1) Supplement?
Solution
The following fixes were first provided in OSS683A and are also provided in OSS683B:
1. Fix a lock timeout panic in shlock_str_qnext.OSR5-1682. Initialize three RTCSTIME variables which are needed by the PSM
routines. Previously, invalid time settings at boot sometimes
causes a system hang.OSR6-148OSS683B also provides these fixes:3. Fix a streams exhaustion problem that could lock the system,
including when rlp is configured and there are a large number
of print jobs.OSR5-1704. The "rm -f" command with no specific files no longer returns an
error code. This conforms to the upcoming POSIX standard
http://austingroupbugs.net/view.php?id=542. It also matches
most other UNIX/BSD/Linux implementations and keeps open source
configure scripts from complaining. Any existing shell scripts
which expect an error code when the rm -f command has no files
will need to be manually updated given the new standard.UW7-295. Fix a tcp_linput panic that was caused by a Definitive 2018
header file /usr/include/sys/netinet/tcp_var.h packaging error
on freshly installed ISL (not upgraded from an earlier release)
systems.OSR5-1716. The boot program scans for the BIOS of various vendors so it can
do specific tasks. The routine scanning for a SMBIOS
implementation on a few platforms got stuck in a loop when it
did not find the vendor's ID. boot now acts properly when it
gets to the end of the range of addresses and does not
find a SMBIOS implementation. This fix was previously provided
by OSS682 on the OpenServer 5 Definitive 2018 insalation DVD.OSR5-1637. Corrected LD_PRELOAD so, when used, loads the libraries set by LD_PRELOAD prior to any other libraries, including libc.so.1.
UW7-183This supplement can be installed on the following SCO OpenServer releases:
SCO OpenServer 5 Definitive 2018----------------------------------------------------------I. Software Notes and Recommendations1. If you have any questions concerning this supplement, please
contact your Xinuos software supplier or your Xinuos Support
Representative.----------------------------------------------------------II. Installation InstructionsTo install OSS683B follow these steps:1. Login as root2. Create an empty directory, such as /tmp/oss683b, to which the patch will be downloaded.
3. Download the OSS683B patch tar file oss683b_vol.tar to the
directory created in step 2. Unwind the tar file in that
directorytar -xf oss683b_vol.tar4. Run the Software Manager with the command:
scoadmin softwareor double-click on the Software Manager icon in the desktop.
5. Pull down the "Software" menu and select "Install New".
6. When prompted for the host from which to install, choose the local machine and then "Continue".
7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".
8. When prompted for the "Image Directory", enter "/tmp/oss683b" (or the directory where you unwound the OSS683B patch file oss683b_vol.tar in step 3) and choose "OK."
9. When prompted to select software to install, make sure that
the "OSS683B" entry is highlighted. Choose "Install".10. Once installation of Escalation Supplement OSS683B is
complete, exit the Software Manager, by selecting "Exit"
from the "Host" menu.11. Once the installation has completed, you can remove or archive the OSS683B patch and the containing directory created in steps 2 and 3.
12. You will need to reboot your system for all changes to take effect.
----------------------------------------------------------III. Removal InstructionsNote: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.
1. Log in as root.2. Execute the command:scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Pull down the "View" menu and select "View Patches".
4. Highlight the "OSS683B" entry.5. Pull down the "Software" menu and select "Remove Software".
6. Once the removal finishes, quit the Software Manager.
7. You will need to reboot your system for all changes to take effect.
----------------------------------------------------------IV. Contents/bin/rm /etc/conf/pack.d/str/Driver.o /etc/setclk /etc/setclock /ibin/rm /stand/boot /usr/include/sys/netinet/tcp_var.h /usr/lib/ld.so.1 /usr/lib/libc.so.1 /usr/lib/lpd /usr/lpd/remote/cancel /usr/lpd/remote/lpmove
----------------------------------------------------------(C) Copyright 2021 Xinuos, Inc. All rights reserved.