Technical article 126507

What is Support Level Supplement (SLS) OSS706, the OpenServer 6 Maintenance Pack 2 Supplement?

OpenServer 6.0.0

Written · Last revised

Problem

What problems are fixed by Support Level Supplement (SLS) OSS706A, the OpenServer 6 Maintenance Pack 2 Supplement?

Solution

OSS706A contains the following fixes and enhancements:

1.  Fixed an ODM problem which prevented the system from booting
    from a second hard disk after encapsulating the root disk and
    mirroring it to the second hard disk.
    fz533688
2.  Fixed an ODM problem which prevented removing and replacing
    disk drives that are part of a mirrored configuration.
    fz533893
3.  In the XENIX emulator (xemul/xrun), fixed bugs in the dup2(S)
    and rdchk(S) system calls.
    fz533666
4.  In the XENIX emulator, modified the behavior of the system
    call chsize(S) in order to allow users to work around a
    problem in early versions of Microsoft Basic which may cause
    some programs using the ISAM facilities of Microsoft Basic to
    generate very large files with corrupt data.
To enable the workaround, define an environment variable
XEMUL_CHSIZE24.  This can be done in the shell with the
following commands:
XEMUL_CHSIZE24=1
export XEMUL_CHSIZE24

Sh or ksh users could place these lines in the .profile files in their home directories.

For system call chsize(fd, len), if XEMUL_CHSIZE24 is set in the environment, and if len > 2^24, and the low-order 16 bits of len are 0, then chsize will act as if len is 0 and truncate the specified file. fz533666

5.  Fixed various problems in ppp.  First, ppp will now support
    baud rates above 38400.  Second, it is no longer necessary
    to disable a serial port before dialing out.  Finally, the
    pppframe module now handles TCFLSH ioctls(), eliminating
    an error message that formerly appeared in the pppd.log file
    whenever a link was disconnected.
    fz533476

This supplement can be installed on the following SCO OpenServer releases:

SCO OpenServer Release 6.0.0 with Maintenance Pack 2
----------------------------------------------------------
I. Software Notes and Recommendations

1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative.

----------------------------------------------------------
II. Installation Instructions
To install OSS706A follow these steps:
1. Login as root

2. Create an empty directory, such as /tmp/oss706a, to which the patch will be downloaded.

3. Download the OSS706A patch file from
https://ftp.scoexpert.com/openserver6/600/patches/oss706a

to the directory created in step 2.

4. Run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

5. Pull down the "Software" menu and select "Install New".

6. When prompted for the host from which to install, choose the local machine and then "Continue".

7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".

8. When prompted for the "Image Directory", enter "/tmp/oss706a" (or the directory where you placed the VOL files in step 2) and choose "OK".

9. When prompted to select software to install, make sure that
   the "OSS706" entry is highlighted.  Choose "Install".
10. Installation of SLS OSS706A is now complete.  To exit the
    Software Manager, select "Exit" from the "Host" menu.

11. Once the installation has completed, you can remove or archive the downloaded patch, the media image files, and the containing directory created in step 2.

----------------------------------------------------------
III. Removal Instructions

Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.

1. Log in as root.
2. Execute the command:
# scoadmin software
or

double-click on the Software Manager icon in the desktop.

3. Highlight the "OSS706" entry.

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager.

Removal of SLS OSS706A is now complete.

From the Xinuos technical article database, record 126507. Reproduced with permission. The original is at www.sco.com/ta/126507, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.