Technical article 128029

What is Support Level Supplement (SLS) OSS726F, the OpenServer 6 Definitive 2018 (D2M1) Supplement?

OpenServer Definitive 2018OpenServer 6

Written

Problem

What problems are fixed by Support Level Supplement (SLS) OSS726F, the OpenServer 6 Definitive 2018 (D2M1) Supplement?

Solution

NOTE:  By default, OpenServer 6 Definitive now halts if a panic is
       encountered.  For details please see the "Software Notes and
       Recommendations" section below.

The following fixes were first provided in OSS726A and are also provided in OSS726F:

1.  Fix an RD1000 panic.

Systems using the AHCI device driver and an attached but empty Dell PowerVault RD1000 Removable Disk Storage device would panic on start up.

To fix these panics requires both this escalation patch for the
sd01 device driver and to use version 2.0a (or later) of the
AHCI device driver.  You can separately download that device
driver or install it via patchck.

The sd01 portion of the fix is to change a recursive loop to an iterative loop.

The ahci portion of the fix is to resolve an event registration issue.

OSR6-113
2.  Fix a mkdev hd command failure when configuring a Dell PowerVault
    RD1000 Removable Disk Storage hard disk.  This error was
    encountered:

ERROR: One or more of the DDB files are not present/corrupt/inaccessible.

UX:ls:ERROR: Cannot access /dev/hba/hba*: no such file or directory.

An incorrect data conversion was fixed.
OSR6-124

The following fixes were first provided in OSS726B and are also provided in OSS726F:

3.  Update header files to support GNU development system while
    maintaining backward compatibility with the native compiler.
UW7-140
4.  Avoid undefined WCHAR_MIN and WINT_MIN variables by setting
    defaults if these variables are not defined elsewhere.
UW7-138
5.  Add missing setenv and unsetenv declarations to stdlib.h
    setenv/unsetenv were added to libc in 2006 but the declarations
    were not added to stdlib.h.
UW7-148

The following fixes were first provided in OSS726C and are also provided in OSS726F:

6.  Added the ACPI reset command to avoid keyboard issues when
    using PS2_KEYBOARD=NO boot parameter.  Previously the 8042
    keyboard controller reset command was used in this scenario
    which resulted in a system hang.
UW7-111
7.  Updated the mkdev.h header file to support different definitions
    for UDK and new development systems.
UW7-155
8.  Initialize three RTCSTIME variables which are needed by the PSM
    routines.  Previously, invalid time settings at boot sometimes
    causes a system hang.
OSR6-148

The following fixes were first provided in OSS726D and are also provided in OSS726F:

9.  Add support for installing OpenServer 6 Definitive 2018 under the
    KVM hypervisor on the CentOS operating system.
UW7-156
10.  Provide a new boot parameter, PANICHALT.  When set to Y the
     system halts on panic and requires hard reboot instead of
     automatically shutting down or rebooting.  The default is Y.
     If set to N then system behaves as per the PANICBOOT settings.
OSR6-172

OSS726E was used for Xinuos development of OSS726F; OSS726E was not publicly released.

OSS726F also provides these fixes:
12.  Fixed an OpenServer 6 Definitive 2018 NFS bug so that OpenServer
     now lists directory contents of mounted NFS shares that are
     larger than two terabytes.
UW7-127
13.  Additional revisions to header files and libraries to correct
     some of the stdio helper functions.  These functions were
     provided in prior releases to aid in open source porting.  This
     SLS modifies:
        __freadable()
        __fwritable()
        __fbufsiz() should have been __fbufsize()
UW7-173
14.  The "rm -f" command with no specific files no longer returns an
     error code.  This conforms to the upcoming POSIX standard
     http://austingroupbugs.net/view.php?id=542.  It also matches
     most other UNIX/BSD/Linux implementations and keeps open source
     configure scripts from complaining.  Any existing shell scripts
     which expect an error code when the rm -f command has no files
     will need to be manually updated given the new standard.
UW7-29

This supplement can be installed on the following SCO OpenServer releases:

SCO OpenServer 6 Definitive 2018
----------------------------------------------------------
I. Software Notes and Recommendations
1.  If your system has an AHCI controller, you should also install
    the revised AHCI device driver (version 2.0a or later).
2.  If you have any questions concerning this supplement, please
    contact your Xinuos software supplier or your Xinuos Support
    Representative.
3.  Starting with OSS726D:
By default, systems now halt on panic instead of shutting down or
rebooting.  If you prefer that the system either shuts down or
reboots on panic, set the new PANICHALT variable to N and set
PANICBOOT accordingly.
4.  Starting with OSS726F:
Any existing shell scripts which expect an error code when the
rm -f command has no files will need to be manually updated
given the new standard to quietly return.
----------------------------------------------------------
II. Installation Instructions
To install OSS726F follow these steps:
1. Login as root

2. Create an empty directory, such as /tmp/oss726f, to which the patch will be downloaded.

3. Download the OSS726F patch tar file oss726f_vol.tar to the
   directory created in step 2.  Unwind the tar file in that
   directory
tar -xf oss726f_vol.tar

4. Run the Software Manager with the command:

scoadmin software

or double-click on the Software Manager icon in the desktop.

5. Pull down the "Software" menu and select "Install New".

6. When prompted for the host from which to install, choose the local machine and then "Continue".

7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".

8. When prompted for the "Image Directory", enter "/tmp/oss726f" (or the directory where you unwound the OSS726F patch file oss726f_vol.tar in step 3) and choose "OK."

9. When prompted to select software to install, make sure that
   the "OSS726F" entry is highlighted.  Choose "Install".
10. Once installation of Escalation Supplement OSS726F is
    complete, exit the Software Manager, by selecting "Exit"
    from the "Host" menu.

11. Once the installation has completed, you can remove or archive the OSS726F patch and the containing directory created in steps 2 and 3.

12. You will need to reboot your system for all changes to take effect.

----------------------------------------------------------
III. Removal Instructions

Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.

1. Log in as root.
2. Execute the command:
scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "View" menu and select "View Patches".

4. Highlight the "OSS726F" entry.

5. Pull down the "Software" menu and select "Remove Software".

6. Once the removal finishes, quit the Software Manager.

7. You will need to reboot your system for all changes to take effect.

----------------------------------------------------------
IV. Contents

/etc/conf/interface.d/psm.2.3 /etc/conf/mdevice.d/psm_acpi /etc/conf/pack.d/acpi/Driver.o /etc/conf/pack.d/mod/Driver.o /etc/conf/pack.d/mps/Driver.o /etc/conf/pack.d/nfs/Driver.o /etc/conf/pack.d/pci/Driver.o /etc/conf/pack.d/psm_acpi/Driver.o /etc/conf/pack.d/psm_apic/Driver.o /etc/conf/pack.d/psm_cfgtables/Driver.o /etc/conf/pack.d/sd01/Driver.o /etc/conf/pack.d/svc/Driver.o /etc/conf/sdevice.d/psm_acpi /etc/setclk /etc/setclock /usr/bin/rm /usr/ccs/lib/libc.a /usr/ccs/lib/libc.so /usr/ccs/lib/libp/libc.a /usr/ccs/lib/libp/libc.so /usr/ccs/lib/libp/libc.so.1 /usr/include/CC/cstdio /usr/include/CC/iostream.h /usr/include/CC/yvals.h /usr/include/ctype.h /usr/include/dirent.h /usr/include/fcntl.h /usr/include/float.h /usr/include/inttypes.h /usr/include/limits.h /usr/include/math.h /usr/include/net/bpf.h /usr/include/pthread.h /usr/include/setjmp.h /usr/include/signal.h /usr/include/stdarg.h /usr/include/stdint.h /usr/include/stdio.h /usr/include/stdlib.h /usr/include/string.h /usr/include/strings.h /usr/include/sys/cdefs.h /usr/include/sys/mkdev.h /usr/include/sys/psm.h /usr/include/sys/sockio.h /usr/include/sys/stat.h /usr/include/sys/types.h /usr/include/time.h /usr/include/unistd.h /usr/include/varargs.h /usr/include/wchar.h /usr/lib/drf/conframdfs /usr/lib/drf/mini_kernel /usr/lib/libc.a /usr/lib/libc.so.1 /usr/lib/libp/libc.a

----------------------------------------------------------
Copyright (c) 2019-2021 Xinuos, Inc.  All Rights Reserved.

From the Xinuos technical article database, record 128029. Reproduced with permission. The original is at www.sco.com/ta/128029, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.