Technical article 126685

What is the Intel Dialogic System Release 5.1 Feature Pack 2 update for SCO UnixWare 7.1.4 and OpenServer 6.0.0

OpenServer 6.0.0UnixWare 7.1.4

Written · Last revised

Problem

What is the Intel Dialogic System Release 5.1 Feature Pack 2 update for SCO UnixWare 7.1.4 and OpenServer 6.0.0 and where can I download it from?

Solution

The Intel Dialogic System Release 5.1 Feature Pack 2 update is an updated set of drivers for Intel Dialogic Hardware.

The Feature Pack is available to download for OpenServer 6.0.0 from:

http://www.sco.com/support/update/download/release.php?rid=240
and
https://ftp.scoexpert.com/openserver6/600/drivers/dialogic.5.1a

The Feature Pack is available to download for UnixWare 7.1.4 from:

http://www.sco.com/support/update/download/release.php?rid=241
and
https://ftp.scoexpert.com/unixware7/714/drivers/dialogic_5.1a

Enclosed below are the Release Notes for the Feature Pack:

=================================================
Intel Dialogic System Release 5.1 Feature Pack 2
for SCO UnixWare 7.1.4 and OpenServer 6.0.0
Release Notes
Package Version 1.0.1
=================================================
*****************************************************************************
WARNING:
	If installing these products on OpenServer 6.0.0, you must first
	install the latest maintenance supplements.  Either

+ Install Open Server 6.0.0 Maintenance Pack 2 or later

******************************************************************************
== About This Information ==

These release notes provide information about the products and features contained in the Intel(r) Dialogic(r) System Release Version 5.1 Feature Pack 2 for SCO UnixWare 7.1.4 and OpenServer 6.

This System Release is equivalent to a subset of the Intel Dialogic System Release 5.1 for Linux.

== Supported Hardware ==

This release does not support any DM3/NetStructure hardware.

This release supports the following SpringWare Hardware: * NETWORK INTERFACE BOARDS D/240PCI-T1, D/240JCT-T1, D/300PCI-E1, D/300JCT-E1 D/240SC-2T1, D/300SC-2E1, D/480SC-2T1, D/480JCT-2T1, D/600SC-2E1, D/600JCT-2T1, D/600JCT-2E1, DTI/480SC, DTI/481SC, DTI/600SC, DTI/601SC * MEDIA BOARDS D/80SC, D/160SC, D/240SC, D/320SC, D/640SC, D/160JCT, D/320JCT * MEDIA WITH LOOP START INTERFACE D/120JCT-LS, D/160SC-LS, LSI/81SC, LSI/161SC * LOW DENSITY BOARDS AND PBX INTEGRATION D/4-PCI, D/4-PCIU, D/41EPCI, D/82JCTU, D/41JCT, D/41JCT-LS, D/42JCT-U, VFX/41JCT-LS * CONFERENCING DCB/320SC, DCB/960SC

Other SpringWare hardware products not in this list may work, but are not officially supported.

== Installation ==

The following packages are included in this release:

Package Name   Package Description
------------   ---------------------------------------------------------------
DLGCdev        Springware Base Development Package
DLGCdocs       Intel Dialogic Windows/Linux Documentation Package
DLGCgc         Global Call Development Package-includes Global Call API
               Library and associated  Software, Global Call ANAPI and ICAPI
               Call Control Libraries, and Global Call Protocol Development
               Kit Run-Time Call Control Library (PDKRT). Global Call ISDN
               support package is installed as part of DLGCdev.
               NOTE: Global Call Protocols are installed from a separately
                     ordered CD or downloaded from Intel.
DLGCparms      Country Specific Parameters for Springware boards
DLGCpri        ISDN PRI Protocols Package for Springware boards
DLGCudd        Dialogic Universal Diagnostics (requires Java 1.4.2 and above)

The Intel Dialogic hardware should be installed before installing the driver software. Also if you are installing on UnixWare 7.1.4 please ensure that Maintenance Pack 2 or later is installed.

Download the DialogicDriver.iso file to your server.

In the directory where you downloaded the DialogicDrivers.iso file, type:

mount `marry -a DialogicDriver.iso` /mnt
Change directory to /mnt:
cd /mnt

The SpringWare base development package must be installed first using the following command line:

pkgadd -d /mnt/DLGCdev.pkg
Follow the prompts during the package installation.  You will configure the
system during installation by specifying the type of SpringWare boards that
are installed.
The other packages are optional and installation depends on your need for the
features the package provides.  Refer to the above table to determine if you
need to install the package.
== Features and Resolved Issues ==
Release 1.0.0 of the package would not handle more than one D/41JCT board if
the boards were assigned contiguous memory regions in PCI memory.  This
is fixed in this release (1.0.1).
A script file /usr/dialogic/gcenv is added to the Global Call release.  This
file sets two environment variables needed by the Global Call libraries. This
script can be incorporated into an application startup.

Refer to the Linux Feature Pack 2 release notes for descriptions on hardware and firmware resolved issues and features.

== Documentation ==
The documentation distributed in this release contains a copy of the Intel
Dialogic System Release 5.1 on Linux Online Bookshelf.  The bookshelf
documentation contains Linux and Windows documentation.

Refer to the Online Bookshelf documentation for programming API's and other reference documentation.

Refer to the Linux Feature Pack 2 release notes for descriptions on hardware and firmware resolved issues and features.

From the Xinuos technical article database, record 126685. Reproduced with permission. The original is at www.sco.com/ta/126685, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.