Technical article 127154

What is the MP4 Device Driver Supplement for OpenServer 6.0.0?

OpenServer 6.0.0

Written · Last revised

Problem

What is the MP4 Device Driver Supplement for OpenServer 6.0.0?

Solution

What follows are the Release and Installation notes for the SCO OpenServer Release 6.0.0 Maintenance Pack 4 Device Drivers Supplement. To download to supplement please go to:

http://www.sco.com/support/update/download/release.php?rid=367

SCO OpenServer Release 6.0.0 Maintenance Pack 4 Device Drivers Supplement

Contents
--------
  o Overview
  o Installing the products on this CD
  o SCO software registration
  o SCO Global Services
  o SCO Self-Help Services
Overview
--------
This CD provides the same OpenServer 6.0.0 Host Bus Adapter (HBA) and
networking device drivers as those provided on the SCO OpenServer 6.0.0
Maintenance Pack 4 CD #1.  This CD can be used during a UnixWare 7.1.4
or OpenServer 6.0.0 ISL installation.
The HBAs provided are:
+  aacraid - Adaptec AACRAID Family PCI SCSI IHV HBA, version 8.0.3 (6011)
+  adp94xx - Adaptec SAS HostRaid HBA, version 1.4 (11658)
+  adpu320 - Adaptec Ultra320 Family PCI SCSI IHV HBA, version 8.0.1a (d3.0)
+  adst70 - Adaptec Ultra160 Family PCI SCSI IHV HBA, version 7.1.3c (d3.14)
+  ahci - SATA AHCI HBA Driver, version 1.2 (1.2)
+  ide - Generic IDE/ATAPI Driver, version 7.1.4h (7.1.4h)
+  mega - LSI Logic MegaRAID HBA, version 8.0.3b (2.0.5)
+  megasas - LSI Logic MegaRAID SAS HBA, version 1.1 (00.00.03.05)
+  mpt - LSI Logic MPT IHV HBA, version 8.1.0 (1.04.14)
An updated OpenServer 6.0.0 Network drivers and utilities (nd) package
(version 8.0.6g) is also provided.  For a full list of Network Card device
drivers supported by this package see the info/README.nd.8.0.6g.txt file
on this CD or see TA 127067.
Note:  If you have any third-party network drivers installed on the system,
       and if this is the first time you are installing the pkgadd-format
       nd package, then you will need to reinstall your third-party device
       drivers after installing the nd package.

Release notes for HBAs and the nd network drivers package are provided in the /info directory.

Installing the products on this CD
----------------------------------
1.  Download the SCO OpenServer Release 6.0.0 Maintenance Pack 4 Device
    Drivers Supplement from either the SCO web site or the SCO FTP server:
+ http://www.sco.com/support/update/download/release.php?rid=367
+ https://ftp.scoexpert.com/openserver6/600/drivers/mp4drivers/

In what follows, we have chosen to save these images in the directory /osr600mp4 on your local system.

2.  Make sure nothing is already mounted on /cd-rom, and enter this command
    to mount the supplement first CD ISO image:
# mount -F cdfs -r `marry -a /osr600mp4/osr600mp4_drivers.iso` /cd-rom

Note the backquote characters around the marry command above; the backquote key is usually on the upper left side of the keyboard.

3.  Do the following as root:

a. See whether you already have a version of the nd package installed by running:

# pkginfo nd
If you see this output:
system      nd             Network Drivers
then you are upgrading from an earlier version of the nd package
and no special steps are required below.  Otherwise, this is a
first-time installation of the nd package, and you should follow
the instructions at step e after you finish installing the driver
packages.

b. Find out which HBAs are present on your system:

# /sbin/sdiconfig
c. Enter:
# pkgadd -d /cd-rom

This will bring up a list of driver packages you can install, including updated HBA drivers and the nd package.

d. Select one or more desired driver packages to install as a comma-separated list, using either the listed numbers or names.

Once all the drivers you select are installed, you will be
prompted again for additional selections or to quit.  Continue
the process until all desired drivers are installed, and then
enter q at the prompt.
Individual driver packages may have additional prompting; read
the prompts carefully as they are displayed.  Typically, select
the default responses that are offered.

e. If you installed the nd package, and if this was a first-time install of that package rather than an upgrade from a previous version, then:

1.  Install the nd package a second time. This is necessary to
    update configured network drivers in the kernel build tree.
2.  Reinstall any third-party network drivers you had installed
    prior to installing nd.

f. Unmount the CD with this command:

# umount /cd-rom

and remove CD from the CD drive.

4.  Enter the following commands to reboot the machine:
# cd /
# shutdown -i6 -g0 -y
SCO software registration
-------------------------

Most SCO OpenServer products require registration after installation. Registration is your confirmation that you have installed and licensed your SCO OpenServer product.

SCO provides an online registration facility at:

http://www.sco.com/registration
You can use the web browser of your choice to register your software.
See ``Registering SCO OpenServer products'' in the SCO OpenServer
Getting Started Guide and ``Registering products'' in the
SCO OpenServer Handbook for complete registration instructions.
SCO Global Support Services
------------------------------

SCO offers a broad portfolio of technical support services tailored to the needs of partners, corporate accounts, and end users. With Support centers located in North America, Europe, and Asia Pacific, staffed by SCO's highly skilled support engineers and local language support availability, SCO can meet all your customer support service requirements.

For more information on SCO Global Services, see:

http://www.sco.com/support/programs
or call:
1-800-726-6561 in the Americas

+44 8700 994 992 in the rest of the world

SCO Self-Help Services
----------------------
SCO provides extensive 24x7 Self-Help technical support services on
SCO products, including installation and configuration support through
an easy-to-use, single Web view.  The Self-Help web site is located at:
http://www.sco.com/support/self_help.html

Other key features include access to Frequently Asked Questions, SCO Certified Hardware, licensing and registration information, and support download area where supplements to SCO products are available.

----------------------------------------------------------------------
Copyright (c) 2008 The SCO Group, Inc.  All Rights Reserved.

Document Version: SCO OpenServer Release 6.0.0 Maintenance Pack 4 December 2008

From the Xinuos technical article database, record 127154. Reproduced with permission. The original is at www.sco.com/ta/127154, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.