Technical article 127840

What is the OpenSSL 0.9.8zaDd Security Update?

OpenServer 6.0.0

Written · Last revised

Problem

What problems are fixed by OpenSSL 0.9.8za?

Solution

OpenSSL 0.9.8za addresses these security issues:
CVE-2014-0224 - Fix for SSL/TLS MITM flaw. An attacker using a
                carefully crafted handshake can force the use of
                weak keying material in OpenSSL SSL/TLS clients
                and servers.
CVE-2014-0221 - Fix DTLS recursion flaw. By sending an invalid DTLS
                handshake to an OpenSSL DTLS client the code can
                be made to recurse eventually crashing in a DoS
                attack.

CVE-2014-0195 - Fix DTLS invalid fragment vulnerability. A buffer overrun attack can be triggered by sending invalid DTLS fragments to an OpenSSL DTLS client or server. This is potentially exploitable to run arbitrary code on a vulnerable client or server.

CVE-2014-3470 - Fix bug in TLS code where clients enable anonymous
                ECDH ciphersuites are subject to a denial of
                service attack.

CVE-2014-0076 - Fix for the attack described in the paper "Recovering OpenSSL ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack" by Yuval Yarom and Naomi Benger. Details can be obtained from: http://eprint.iacr.org/2014/140

Fix handling of warning-level alerts in SSL23 client mode so they don't cause client-side termination (eg. on SNI unrecognized_name warnings). Add client and server support for six additional alerts per RFC 6066 and RFC 4279.

This supplement can be installed on the following OpenServer releases:

SCO OpenServer Release 6.0.0 with Maintenance Pack 4 OpenServer 6V

----------------------------------------------------------
I. Software Notes and Recommendations

1. If you have any questions concerning this supplement, please contact your software supplier or your Xinuos Support Representative.

----------------------------------------------------------
II. Installation Instructions

To install OpenSSL 0.9.8zaDd, follow these steps:

1. Login as root.

2. Create an empty directory, such as /tmp/OpenSSL.0.9.8zaDd, to which the supplement will be downloaded.

3. Download OpenSSL-0.9.8zaDd-VOLS.tar and save it to the directory created in step 2.

4. After the download is complete, change to the directory containing the OpenSSL-0.9.8zaDd-VOLS.tar file, and run the following to extract the media image files:

# tar xvf OpenSSL-0.9.8zaDd-VOLS.tar

5. Run the Software Manager with the command:

# scoadmin software

6. Pull down the "Software" menu and select "Install New".

7. When prompted for the host from which to install, choose the local machine and then "Continue".

8. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".

9. When prompted for the "Image Directory", enter the name of the directory created in step 2 and choose "OK".

10. When prompted to select software to install, make sure that
    the entry for "OpenSSL version 0.9.8za (ver 0.9.8zaDd)" is
    highlighted.  Choose "Install".
11. Under "Upgrading Components Warning", select "Leave
    replaced components on hard disk (loaded only)."  Doing
    so will allow you to revert to the previous version if
    you remove this supplement later.  If you skip this step,
    then removing the supplement later will leave you without
    a working OpenSSL package.  If necessary, this can be remedied
    by reinstalling the OpenSSL package inside the "Supplemental
    Graphics, Web and X11 Libraries (ver 1.0.0Ce)" component from
    Maintenance Pack 4 or one of the previously released
    supplements.
12. Choose "Continue."

13. Installation of OpenSSL 0.9.8za will now proceed. Once it's completed, select "OK."

14. To exit the Software Manager, select "Exit" from the "Host" menu.

15. Once the installation has completed, you can remove or archive the downloaded tar file, the media image files, and the containing directory created in step 2.

16. There is no need to reboot the system for this package.

----------------------------------------------------------
III. Removal Instructions

Note: These instructions will remove OpenSSL 0.9.8za package. They will also restore the previously installed version of OpenSSL provided you selected "Leave replaced components on hard disk (loaded only)" in step 12 of the Installation Instructions above.

1. Log in as root.
2. Execute the command:
# scoadmin software

3. Highlight the entry for "OpenSSL version 0.9.8za (ver 0.9.8zaDd)" and make sure nothing else is highlighted.

5. Pull down the "Software" menu and select "Remove Software".

6. In the windows labeled "Confirm Selected Software,"
   make sure that "OpenSSL version 0.9.8za (ver 0.9.8zaDd)"
   is shown and select "Remove."

7. Removal of OpenSSL 0.9.8zaDd will now proceed. Once it's completed, select "OK."

Note: The rest of this procedure assumes that you kept
the prior OpenSSL version loaded as described above in
Step 12 of the Installation Instructions.  If you did not
do this then you will need to reinstall the OpenSSL 0.9.8eDa
package from within the Supplemental Graphics, Web and X11
Libraries (ver 1.0.0Ce) from OpenServer 6.0.0 Maintenance Pack 4.

8. Pull down the "Software" menu and select "Install New".

9. When prompted for the host from which to install, choose the local machine and then "Continue".

10. In the "Select Media" menu, pull down the "Media Device" menu. Select "Loaded Software", then choose "Continue".

11. When prompted to select software to install:

If reverting back to version 0.9.8eDa in Maintenance Pack 4:

i. Move the cursor down to "SCO OpenServer Release 6.0.0 Maintenance Pack 4 (ver 1.0.0Ce)" and hit <ENTER> to show loaded components from Maintenance Pack 4.

ii. Move the cursor down to "Supplemental Graphics, Web
    and X11 Libraries (ver 1.0.0Ce)" and hit <ENTER> to
    show subpackages from this component.

iii. Move the cursor down to "OpenSSL (ver 0.9.8eDa)" and hit <ENTER> to highlight it.

iv. Make sure no other entries are highlighted.

12. Choose "Install."

13. Installation of OpenSSL 0.9.8e will now proceed. Once it's completed, select "OK."

14. To exit the Software Manager, select "Exit" from the "Host" menu.

From the Xinuos technical article database, record 127840. Reproduced with permission. The original is at www.sco.com/ta/127840, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.